| Item | Part No. | Part Name | Qty | Serial No. |
| | TURBOCHARGER (SEE FIG. A1120-A3A6) | | |
| (NSS) | TURBOCHARGER | | |
| 1 | (NSS) | BAFFLE, TURBOCHARGER NOISE | | |
| 2 | 6736-81-8370 | BEARING, TURBOCHARGER | | |
| 3 | 6731-82-8210 | NUT, LOCK | | |
| 4 | 6733-81-8650 | WASHER, PLAIN | | |
| 5 | 6736-81-8480 | BOLT | | |
| 6 | 6736-81-8430 | SHIELD, TURBOCHARGER HEAT | | |
| 7 | (NSS) | SHAFT & WHEEL | | |
| 8 | 6733-81-8360 | RING, RETAINING | | |
| 9 | (NSS) | DATAPLATE | | |
| 10 | 6733-81-8330 | BAFFLE, OIL | | |
| 11 | 6732-81-8140 | COUPLING, ELBOW HOSE | | |
| 12 | (NSS) | END, ADJUSTING LINK | | |
| 13 | 6743-82-8610 | NUT, HEXAGON FLANGE | | |
| 14 | 6733-81-8370 | RING, RETAINING | | |
| 15 | 6733-81-8460 | SEAL, O RING | | |
| 16 | 6743-82-8130 | BOLT (M8-1.25x20) | | |
| 17 | 6733-81-8270 | PLATE, OIL SEAL | | |
| 18 | 6733-81-8260 | SLINGER, OIL | | |
| 19 | (NSS) | ACTUATOR, TURBOCHARGER | | |
| 20 | 6733-81-6850 | SPACER, MOUNTING | | |
| 21 | 6735-81-6810 | SPACER, MOUNTING | | |
| 22 | 6735-82-8220 | BEARING, TURBOCHARGER THRUST | | |
| 23 | 6735-81-8620 | COLLAR, THRUST | | |
| 24 | 6742-01-5569 | BOLT | | |
| 25 | 1317 841 H1 | IMPELLER, TURBOCHARGER COMPRESSOR | | |
| 26 | 6733-81-8480 | PIN, ROLL | | |
| 27 | (NSS) | HOUSING, TURBOCHARGER BEARING | | |
| 28 | (NSS) | PLATE, CLAMPING | | |
| 29 | 6735-81-8370 | BOLT | | |
| 30 | (NSS) | HOUSING, TURBINE | | |
| 31 | 6735-81-8310 | RING, RETAINING | | |
| 32 | 6735-81-8490 | BRACKET, ACTUATOR | | |
| 33 | 6742-01-5565 | GASKET, ADAPTER | | |
| 34 | 6742-01-5564 | CLAMP, HOSE | | |
| 35 | 1317 839 H1 | CONNECTION, ADAPTER | | |
| 36 | 6742-01-5566 | HOSE, PLAIN | | |
| 37 | (NSS) | HOUSING, COMPRESSOR | | |
| 38 | 6736-81-8440 | SEAL, SPLIT RING | | |
| 39 | 6736-81-8320 | SEAL, SPLIT RING | | |
| 40 | 6736-81-8380 | BOLT (M8-1.25x12) | | |
| 41 | 6736-81-8360 | RING, RETAINING | | |
| 42 | 6743-82-8140 | RING, RETAINING | | |
