| Item | Part No. | Part Name | Qty | Serial No. |
| 1305 893 H91 | HEATER ASSEMBLY, EAGLE | | |
| 1 | 1306 348 H1 | HOUSING, MAIN | | |
| 2 | 1306 349 H1 | COVER, HOUSING | | |
| 3 | 1303 667 H1 | DEFLECTOR, WATER | | |
| 4 | 1303 671 H1 | COIL, EVAPORATOR | | |
| 5 | 1303 672 H1 | VALVE, EXPANSION, BLOCK TYPE | | |
| 6 | 1303 668 H1 | SPACER, PLASTIC | | |
| 7 | 1434 308 H1 | O RING | | |
| 8 | (NSS) | WASHER, LOCK TOOTH | | |
| 9 | (NSS) | NUT, HEX 1/4-20 | | |
| 10 | 1303 669 H1 | HOSE 5/16 in | | |
| 11 | 1303 670 H1 | HOSE 1/2 in | | |
| 12 | 1303 650 H1 | COIL, HEATER | | |
| 13 | (NSS) | CLAMP, HOSE (UP TO 1 1/4 IN) | | |
| 14 | 418 T42 A270 | HOSE, HEATER (CUT 18 IN LONG) | | |
| 15 | 418 T42 A270 | HOSE, HEATER (CUT 12.8 IN LONG) | | |
| 16 | (NSS) | GROMMET, PLASTIC (1 1/4 IN HOLE) | | |
| 17 | | HEATER VALVE ASSEMBLY (SEE PG 13-064) | | |
| 18 | 418 T42 A270 | HOSE, HEATER (CUT 3 IN LONG) | | |
| 19 | 1431 226 H1 | FITTING-90° | | |
| 1300 222 H1 | FITTING-STRAIGHT | | |
| 1431 254 H1 | FITTING-90° | | |
| 20 | (NSS) | GROMMET, RUBBER (1 IN HOLE) | | |
| 21 | 1300 164 H1 | RESISTOR PAD, 24V - BLACK | | |
| 22 | (NSS) | BOLT, #10-32 X 1/2 | | |
| 23 | 1303 659 H1 | KNOB | | |
| 24 | 1303 660 H1 | FILTER MOUNT SLOT | | |
| 25 | 1300 157 H1 | FILTER, PAPER | | |
| 26 | (NSS) | BOLT, WHIZLOCK 1/4-20 X 1/2 | | |
| 27 | (NSS) | BOLT, 1/4-20 THD TORX | | |
| 28 | (NSS) | BOLT, WHIZLOCK 1/4-20 X 1/2 | | |
| 29 | 1306 341 H1 | DECAL, WATER IN | | |
| 30 | 1306 341 H1 | DECAL, WATER OUT | | |
| 31 | (NSS) | DECAL, FREON | | |
| 32 | (NSS) | PLUG, HARD PLASTIC 5/8 IN ID | | |
| 33 | (NSS) | PLUG, HARD PLASTIC 7/8 IN ID | | |
| 34 | (NSS) | PLUG, HARD PLASTIC 3/8 IN ID | | |
| 35 | | MOTOR ASSEMBLY (SEE PG 13-068) | | |
| | | | |
| | F1 - CUT FROM BULK HOSE 364 359 C1 | | |
| | | | |
| | | | |
| | F2 - ONE OF THESE FITTINGS, NOT SUPPLIED BY EAGLE, IS | | |
| | REQUIRED BETWEEN ITEM #19 AND THE HEATER HOSES | | |
| | COMING FROM THE ENGINE | | |
