| Item | Part No. | Part Name | Qty | Serial No. |
| 1 | | COMPRESSOR MOUNTING (SEE PG 13-150) | | |
| 2 | | BELT, COMPRESSOR DRIVE (SEE PG 13-150) | | |
| 1437 198 H91 | KIT, CONDENSER HOSE AND COIL | | |
| 3 | 1431 743 H1 | DRYER/RECEIVER | | |
| 4 | 1433 065 H1 | HOSE - 13/32 X 5 FT | | |
| 5 | 1433 068 H1 | HOSE - 5/16 X 6 FT | | |
| 6 | 1431 742 H1 | COIL, CONDENSER | | |
| 7 | 1431 745 H1 | BRACKET, DRYER/RECEIVER MOUNTING | | |
| 8 | (NSS) | SWITCH, HIGH PRESSURE | | |
| 9 | 25 493 R1 | BOLT | | |
| 25 533 R1 | WASHER, FLAT | | |
| 25 520 R1 | NUT, HEX | | |
| 161 496 | SLEEVE, PROTECTIVE - 22 IN | | |
| 10 | 25 522 R1 | NUT, HEX | | |
| 11 | 25 534 R1 | WASHER, FLAT | | |
| 1432 856 H91 | KIT, HOSE | | |
| 12 | 1433 067 H1 | HOSE - 5/16 X 6 FT | | |
| 13 | 1433 066 H1 | HOSE - 1/2 X 8 FT | | |
| 1431 737 H1 | FITTING, EVAPORATOR DRAIN | | |
| 14 | 105 899 | STUD, WELD | | |
| 15 | 651 569 C1 | CLAMP | | |
| 16 | 25 553 R1 | WASHER, FLAT | | |
| 17 | 17 044 R1 | NUT, HEX | | |
| 1431 377 H1 | SLEEVE, HOSE WRAP - 20 IN | | |
| 935 522 C1 | STRAP, TIE | | |
| 18 | | BOX ASSEMBLY, AIR CONDITIONER/HEATER (SEE PG 13-140) | | |
| 19 | | RADIATOR/OIL COOLER (SEE PG 06-010) | | |
| | | | |
| | F1 - WRAP HOSES TOGETHER AT CONDENSER WITH SLEEVE P/N 161 496. | | |
| | CUT SLEEVE TO LENGTH. | | |
| | | | |
| | F2 - HIGH PRESSURE SWITCH IS NOW LOCATED IN EVAPORATOR CASE. USE | | |
| | CAP P/N 9403 369 TO CONNECT THE WIRES TOGETHER IN HARNESS. | | |
| | | | |
| | F3 - WRAP HOSES TOGETHER WITH BULK HOSE WRAP P/N 1431 377 H1. CUT | | |
| | WRAP TO LENGTH. | | |
