Item | Part No. | Part Name | Qty | Serial No. |
1 | | COMPRESSOR MOUNTING (SEE PG 13-152) | | |
2 | | BELT, COMPRESSOR DRIVE (SEE PG 13-152) | | |
| 1439 656 H91 | KIT, CONDENSER | | |
3 | 1433 065 H1 | HOSE ASSEMBLY | | |
| 1309 636 H1 | O-RING | | |
4 | 1439 701 H1 | HOSE ASSEMBLY | | |
| 1440 151 H1 | O-RING | | |
5 | 1431 742 H2 | COIL, CONDENSER | | |
| 1439 742 H91 | RECEIVER/DRYER ASSEMBLY | | |
6 | 1439 698 H1 | RECEIVER/DRYER | | |
7 | 1439 704 H91 | BRACKET, DRYER MOUNTING | | |
8 | 1439 705 H1 | CLAMP, MOTOR - WIRE | | |
| 30 209 R1 | WASHER, FLAT - 6.4 MM | | |
| 30 365 R1 | SCREW - M6 X 440 MM | | |
| 31 107 R1 | LOCKNUT, M6 | | |
| 1439 653 H91 | KIT, HOSE | | |
9 | 1439 702 H1 | HOSE - 5/16 X 7.5 FT | | |
| 1440 151 H1 | O-RING | | |
10 | 1433 066 H1 | HOSE - 1/2 X 8 FT | | |
| 1440 152 H1 | O-RING | | |
11 | 105 899 | STUD, WELD | | |
12 | 25 553 R1 | WASHER, FLAT | | |
13 | 17 044 R1 | NUT, HEX | | |
14 | 161 496 | SLEEVE, PROTECTIVE - 22 IN | | |
15 | 935 522 C1 | STRAP, TIE | | |
16 | 1431 377 H1 | HOSE WRAP - CUT TO LENGTH | | |
17 | 93 958 | CLAMP | | |
| 27 326 R1 | WASHER, HARDENED - 5/16 IN | | |
| 25 653 R1 | BOLT, HEX 5/16 - 18 | | |
18 | 93 958 | CLAMP | | |
| 28 422 R1 | WASHER, HARDENED - 3/8 IN | | |
| 17 044 R1 | LOCKING NUT, 3/8 - 16 | | |
| 20 537 R1 | BOLT, 3/8 - 16 X 1 IN | | |
19 | 27 843 R1 | CLAMP - USE EXISTING HARDWARE | | |
20 | | BOX ASSEMBLY, AIR CONDITIONER/HEATER (SEE PG 13-140) | | |
21 | | RADIATOR/OIL COOLER (SEE PG 06-010) | | |