| Item | Part No. | Part Name | Qty | Serial No. |
| 1 | TA4411 | INJECTOR, REAR (5 PIECE) (1) | | |
| 1 | XA2520 | NIPPLE & CAP ASSEMBLY | | |
| 2 | VW7989 | INJECTOR, REAR (4-PIECE) (1) | | |
| 2 | XA2520 | NIPPLE & CAP ASSEMBLY | | |
| 3 | VW7990 | CAP, PROTECTIVE | | |
| 4 | WB0252 | FITTING, ELBOW - 90 DEG | | |
| 5 | EJ4053 | PLATE, MOUNTING | | |
| 6 | MM0606 | CAPSCREW - M10 X 1.50 X 30 | | |
| 7 | MM0471 | LOCKWASHER - M10 | | |
| 8 | MM0611 | CAPSCREW - M10 X 1.50 X 60 | | |
| 9 | MM0461 | FLAT WASHER - M10 | | |
| 10 | MM0178 | NUT - M10 X 1.50 | | |
| 11 | EG0583 | PLATE, COVER (REAR INJECTORS) | | |
| 12 | TB8803 | NIPPLE, PIPE - 3/8" | | |
| 13 | WB0262 | FITTING, ELBOW - 90 DEG | | |
| 14 | HA6448 | HOSE (TO JUNCTION AT HORSECOLLAR) | | |
| 15 | HA1413 | HOSE (TO BOTTOM OF REAR SUSPENSIONS) | | |
| 16 | WB0574 | FITTING, STRAIGHT (AT BOTTOM OF REAR SUSPENSIONS) | | |
| 17 | HA0994 | HOSE (TO BOTTOM OF HOIST CYLINDERS) | | |
| 18 | WB0252 | FITTING, ELBOW - 90 DEG (AT BOTTOM OF HOIST CYLINDERS) | | |
| 19 | HA0570 | HOSE (TO R.H. END OF SWAY BAR) | | |
| 20 | WB0281 | FITTING, ELBOW - 45 DEG (AT R.H. END OF SWAY BAR) | | |
| 21 | HA1413 | HOSE (TO L.H. END OF SWAY BAR) | | |
| 22 | WB0281 | FITTING, ELBOW - 45 DEG (AT L.H. END OF SWAY BAR) | | |
| 23 | HA0197 | HOSE (TO TOP OF REAR SUSPENSIONS) | | |
| 24 | WB0499 | FITTING, ELBOW - 90 DEG (AT TOP OF REAR SUSPENSIONS) | | |
| 25 | VD4661 | HOSE (TO BODY PIVOT PINS) | | |
| 26 | WB0284 | FITTING, ELBOW - 45 DEG (AT BODY PIVOT PINS) | | |
| 27 | PC1654 | SWITCH, PRESSURE | | |
| 28 | HA0394 | HOSE (TO TOP OF HOIST CYLINDERS) | | |
| 29 | WB0252 | FITTING, ELBOW - 90 DEG (AT TOP OF HOIST CYLINDERS) | | |
| 30 | HA8283 | HOSE (TO DRIVE CASE PIVOT) | | |
| 31 | R0086 | BUSHING, PIPE - 1/4" X 3/8" | | |
| 32 | R2508 | FITTING, TEE | | |
| 33 | R2510 | NIPPLE | | |
| NS|36 | | NOTE: (1) FOR SINGLE INJECTOR, ORDER VS1947. | | |
