| Item | Part No. | Part Name | Qty | Serial No. |
| (1262 757 H91) | BLADE EQUIPMENT | | |
| (1262 760 H91) | TRUNNIONS | | |
| 1 | 1280 387 H91 | TRUNNION, LEFT | | |
| 25 646 R1 | BOLT, HEX - 1NCx2-3/4 | | |
| 25 550 R1 | WASHER, FLAT - 1 | | |
| 2 | 1280 388 H91 | TRUNNION, RIGHT | | |
| 25 646 R1 | BOLT, HEX - 1NCx2-3/4 | | |
| 25 550 R1 | WASHER, FLAT - 1 | | |
| 3 | 1279 063 H1 | PIN, C FRAME | | |
| 24 880 R1 | BOLT, HEX - 5/8NCx3-1/2 | | |
| 9412 231 | NUT, LOCK - 5/8NC | | |
| (1262 850 H91) | DOZER CYLINDERS | | |
| 4 | | CYLINDER, LIFT (SEE PG 10-058) | | |
| 5 | | CYLINDER, ANGLE (SEE PG 10-062) | | |
| 6 | | CYLINDER, TILT (SEE PG 10-060) | | |
| 7 | 1270 112 H1 | PIN, MOUNTING | | |
| 24 856 R1 | BOLT, HEX - 7/16NCx4 | | |
| 9413 981 | NUT, LOCK - 7/16NC | | |
| 8 | 1279 088 H1 | PIN, MOUNTING | | |
| 24 856 R1 | BOLT, HEX - 7/16NCx4 | | |
| 9413 981 | NUT, LOCK - 7/16NC | | |
| 9 | | BLADE AND ANGLING FRAME (SEE PG 17-006) | | |
| 10 | 1270 296 H91 | PIN, LOCK | | |
| 24 859 R1 | BOLT, HEX - 1/2NCx3/4 | | |
| 932 278 C1 | WASHER, FLAT - 1-3/8 | | |
| 11 | 1209 358 H1 | SHIM, FRAME - 0.090IN | | |
| 12 | 1209 358 H1 | SHIM, FRAME - 0.090IN | | |
| 13 | 1209 358 H1 | SHIM, FRAME - 0.090IN | | |
| 14 | | FRAME, C (SEE PG 17-012) | | |
| | TUBING AND HOSES (SEE PG 10-006) | | |
| | | | |
| | F1 - PART NUMBER IS A NON-SERVICE PART AND IS LISTED FOR REFERENCE ONLY. | | |
| | | | |
| | | | |
| | F2 - MINIMUM OF 1 SHIM TO A MAXIMUM OF 2 SHIMS USED AT THIS POSITION. | | |
| | | | |
