| Item | Part No. | Part Name | Qty | Serial No. |
| 206-01-A1120 | MOTOR ASSEMBLY, CRANKING | | |
| 1 | 1283 444 H1 | FRAME, COMMUTATOR END | | |
| (NSS) | BOLT | | |
| 2 | (NSS) | BUSHING, COMMUTATOR END FRAME | | |
| 3 | 1210 065 H1 | ARMATURE | | |
| 4 | 1283 445 H1 | COIL, FIELD | | |
| 5 | (NSS) | STOP, PINION | | |
| 6 | 1266 795 H1 | HOUSING, LEVER | | |
| 1245 107 H1 | SCREW, LEVER HOUSING MOUNTING | | |
| 7 | (NSS) | BUSHING, LEVER HOUSING | | |
| 8 | 1210 067 H1 | DRIVE, MOTOR | | |
| 9 | 1267 948 H1 | HOUSING, DRIVE | | |
| 1245 105 H1 | SCREW, DRIVE HOUSING MOUNTING | | |
| 10 | (NSS) | BUSHING, DRIVE HOUSING | | |
| 11 | 1283 447 H1 | SWITCH, SOLENOID | | |
| 1283 448 H1 | SCREW AND WASHER, SWITCH MOUNTING | | |
| 12 | (NSS) | BRUSH | | |
| (NSS) | SCREW, BRUSH LEAD MOUNTING | | |
| 13 | (NSS) | SPRING, BRUSH | | |
| 14 | 1283 452 H1 | PLATE ASSEMBLY, BRUSH | | |
| 15 | 1228 450 H1 | PLUNGER | | |
| 16 | 1210 071 H1 | BOOT | | |
| 17 | 1210 073 H1 | SPRING, PLUNGER | | |
| 18 | (NSS) | LEVER, SHIFT | | |
| 19 | (NSS) | WASHER, SPACER DRIVE END | | |
| 20 | (NSS) | WASHER, BRAKE | | |
| 21 | (NSS) | WASHER, COMMUTATOR END THRUST | | |
| 22 | (NSS) | CONDUCTOR | | |
| 23 | (NSS) | WASHER, SHUNT TERMINAL LOCK | | |
| 24 | (NSS) | WASHER, SHUNT LEAD TO SWITCH ATTACHING | | |
| 25 | (NSS) | NUT, FIELD COIL CONNECTOR TO SWITCH | | |
| 26 | (NSS) | NUT, SHUNT LEAD TO SWITCH | | |
| 27 | (NSS) | NUT, SHUNT TERMINAL | | |
| 28 | (NSS) | NUT, PLUNGER ROD GUIDE ADJUSTING | | |
| 29 | (NSS) | WICK, OIL RESERVOIR | | |
| 30 | (NSS) | RING, SHIFT LEVER SHAFT RETAINING | | |
| 31 | (NSS) | SHAFT, SHIFT LEVER | | |
| 32 | (NSS) | SCREW, FIELD COIL LEAD TO BRUSH HOLDER | | |
| 33 | (NSS) | SEAL, OIL - LEVER HOUSING | | |
| 34 | (NSS) | RING, PINION STOP RETAINER | | |
| 35 | 1210 074 H1 | RETAINER, PLUNGER SPRING (13/32 | | |
| 36 | 1210 072 H1 | RETAINER, PLUNGER SPRING (1-13/16 | | |
| 37 | 1283 448 H1 | SCREW, CONNECTOR TO FIELD TERMINAL | | |
| 38 | (NSS) | WASHER, SHUNT TERMINAL INSULATOR | | |
| 39 | (NSS) | WASHER, FIELD TERMINAL | | |
| 40 | (NSS) | WASHER, SHUNT TERMINAL | | |
| 41 | 1210 066 H1 | PLUG, LEVER HOUSING INSPECTION | | |
| 42 | 1210 070 H1 | WASHER, PLUNGER SPRING RETAINER | | |
| 43 | (NSS) | BUSHING, SHUNT TERMINAL | | |
| 44 | 1268 221 H1 | POLE SHOE | | |
| 1245 108 H1 | SCREW, POLE SHOE | | |
| 45 | 1283 456 H1 | CONNECTOR, FIELD TERMINAL TO SWITCH | | |
| 46 | (NSS) | CUP, OIL RESERVOIR | | |
| 47 | 1228 454 H1 | PIN, BRUSH PLATE LOCATOR SPRING | | |
| 48 | (NSS) | O-RING, DRIVE HOUSING AND LEVER HOUSING | | |
| 49 | (NSS) | GASKET, LEVER HOUSING INSPECTION PLUG | | |
| 50 | (NSS) | O-RING, SHIFT LEVER SHAFT (3/8 | | |
| 51 | (NSS) | INSULATOR | | |
| 52 | (NSS) | O-RING, SHIFT LEVER SHAFT (1/2 | | |
| 53 | (NSS) | O-RING, BETWEEN LEVER HOUSING AND FRAME | | |
| 54 | (NSS) | INSULATOR, SHUNT TERMINAL | | |
| 55 | 1210 061 H1 | INSULATOR, FIELD TERMINAL (INSIDE) FRAME | | |
| 56 | 1210 062 H1 | INSULATOR, FIELD TERMINAL (OUTSIDE) FRAME | | |
| 57 | (NSS) | LEAD, SHUNT TERMINAL IN FRAME TO SWITCH | | |
| | RETURN TERMINAL | | |
| 58 | (NSS) | O-RING, ON MOTOR FRAME | | |
| 59 | (NSS) | O-RING, BETWEEN SWITCH AND LEVER HOUSING | | |
| 60 | (NSS) | BODY, CRANKING MOTOR | | |
| 61 | 213 262 R1 | RING, PLUNGER SPRING RETAINER | | |
| 62 | (NSS) | WASHER, FLAT | | |
| 63 | (NSS) | TERMINAL, SHUNT COIL | | |
| 64 | 1228 453 H1 | INSULATOR, DRIVE END FIELD COIL (TRIANGLE) | | |
| 65 | 1283 448 H1 | SCREW, FIELD COIL TO SWITCH | | |
| 1283 495 H1 | KIT, BRUSH REPAIR | | |
| 1283 496 H1 | KIT, BUSHING REPAIR | | |
| 1268 843 H1 | KIT, SHIFT LEVER REPAIR | | |
| | | | |
| | F1 - INCLUDED IN KIT 1283 495 H1 | | |
| | | | |
| | F2 - INCLUDED IN KIT 1283 496 H1 | | |
| | | | |
| | F3 - INCLUDED IN KIT 1268 843 H1 | | |
| | | | |
