| Item | Part No. | Part Name | Qty | Serial No. |
| 739 912 C91 | MOTOR ASSEMBLY, CRANKING | | |
| 1 | 1211 480 H91 | HOUSING ASSEMBLY, DRIVE END | | |
| 2 | 1211 288 H1 | BUSHING, HOUSING | | |
| 3 | 1211 276 H1 | WICK, OIL | | |
| 4 | 1211 277 H1 | PLUG, WICK | | |
| 20 499 R1 | BOLT, MOUNTING - 5/16NCx1-1/2 | | |
| 21 241 R1 | BOLT, MOUNTING - 5/16NCx7/8 | | |
| 5 | 1223 259 H1 | DRIVE, MOTOR | | |
| 6 | 1211 289 H1 | LEVER, SHIFT | | |
| 7 | 1211 287 H1 | GASKET, BETWEEN HOUSINGS | | |
| 8 | 1211 286 H1 | WASHER, BRAKE | | |
| 9 | 1211 284 H1 | PLUG, HOUSING | | |
| 10 | 1211 283 H1 | BUSHING, LEVER HOUSING | | |
| 11 | (NSS) | HOUSING, SHIFT LEVER | | |
| (NSS) | BOLT, MOUNTING - 1/4NCx1 | | |
| 12 | 1210 066 H1 | COVER, INSPECTION | | |
| 13 | 1211 151 H1 | GASKET, COVER | | |
| 14 | 1211 277 H1 | PLUG, WICK | | |
| 15 | 1211 276 H1 | WICK, OIL | | |
| 16 | 213 262 R1 | RING, RETAINING | | |
| 17 | 355 967 R1 | O-RING | | |
| 18 | 1211 152 H1 | SHAFT, SHIFT LEVER | | |
| 19 | 352 219 R1 | O-RING | | |
| 20 | 1211 282 H1 | CABLE, SOLENOID TO COMMUTATOR END | | |
| 21 | 1211 398 H1 | SWITCH, SOLENOID | | |
| 113 955 | BOLT AND WASHER | | |
| 22 | 1211 290 H1 | PLUNGER, SOLENOID | | |
| 19 839 R1 | NUT, LOCK - 5/16NF | | |
| 23 | 1210 070 H1 | WASHER, RETAINER | | |
| 24 | 1211 291 H1 | BOOT, PLUNGER | | |
| 25 | 1210 072 H1 | RETAINER, SPRING | | |
| 26 | 1210 073 H1 | SPRING, PLUNGER | | |
| 27 | 1210 074 H1 | RETAINER, SPRING | | |
| 28 | 22 411 R1 | O-RING | | |
| 29 | 1211 285 H1 | SEAL, SHAFT OIL | | |
| 30 | 1211 356 H1 | SPACER, SHAFT | | |
| 31 | 1211 271 H1 | INSULATOR, TRIANGULAR | | |
| 32 | (NSS) | SHOE, POLE | | |
| 1211 150 H1 | SCREW, SHOE | | |
| 33 | 1211 397 H1 | COIL, FIELD (6 COILS) | | |
| 34 | 1211 269 H1 | STUD, TERMINAL | | |
| 35 | 1211 264 H1 | KIT, TERMINAL | | |
| 36 | 1211 265 H1 | WASHER, STUD - INSULATED | | |
| 37 | 1211 266 H1 | WASHER, STUD - PLAIN | | |
| 38 | (NSS) | NUT, TERMINAL - 1/2NC | | |
| 39 | (NSS) | CONNECTOR, TERMINAL TO SWITCH | | |
| 40 | 1211 267 H1 | NUT AND WASHER, TERMINAL STUD | | |
| 41 | (NSS) | INSULATOR, FIELD COIL | | |
| 42 | 1211 396 H1 | ARMATURE | | |
| 43 | 1211 402 H1 | WASHER, THRUST | | |
| 44 | 1211 395 H1 | BUSHING, COMMUTATOR END FRAME | | |
| 45 | 1211 292 H1 | SCREW, FIELD COIL | | |
| 46 | 1211 401 H91 | PLATE ASSEMBLY,BRUSH | | |
| 47 | 1211 400 H1 | SPRING, BRUSH | | |
| 1211 279 H1 | SCREW, ATTACHING | | |
| 48 | 1211 399 H1 | BRUSH | | |
| 1211 292 H1 | SCREW, BRUSH | | |
| 49 | 1211 280 H1 | WASHER, STUD - INSULATED | | |
| 50 | (NSS) | FRAME, COMMUTATOR END | | |
| (NSS) | BOLT, MOUNTING - 1/2NCx1 | | |
| 51 | 1211 281 H1 | KIT, TERMINAL | | |
| 52 | (NSS) | WASHER, LOCK - 1/2 | | |
| | | | |
| | F1 - FOR MOUNTING HARDWARE SEE PG E6-005 | | |
| | | | |
