| Item | Part No. | Part Name | Qty | Serial No. |
| (739 912 C91) | MOTOR ASSY, CRANKING | | |
| 1 | 1211 395 H1 | BUSHING, CE FRAME | | |
| 2 | 1211 396 H1 | ARMATURE, MOTOR | | |
| 3 | 1211 397 H1 | COIL ASSY, FIELD | | |
| 4 | 1211 269 H1 | STUD, TERMINAL | | |
| 5 | 1211 283 H1 | BUSHING, LEVER HOUSING | | |
| 6 | 1223 259 H1 | CLUTCH, POSITORK | | |
| 1211 480 H91 | HOUSING ASSY, DRIVE | | |
| 7 | 1211 288 H1 | BUSHING, HOUSING | | |
| 8 | 1211 277 H1 | PLUG, WICK | | |
| 9 | 1211 276 H1 | WICK, FELT | | |
| 10 | (NSS) | HOUSING, DRIVE | | |
| 20 499 R1 | BOLT, MOUNTING - 5/16NCx1-1/2 | | |
| 21 241 R1 | BOLT, MOUNTING - 5/16NCx7/8 | | |
| 11 | 1211 398 H1 | SOLENOID | | |
| 113 955 | BOLT, MOUNTING - 1/4NCx1/2 | | |
| 12 | 1211 399 H1 | BRUSH ASSY, MOTOR | | |
| 1211 292 H1 | SCREW, MOUNTING | | |
| 1211 401 H91 | PLATE ASSY, BRUSH | | |
| 13 | 1211 400 H1 | HOLDER AND SPRING, BRUSH | | |
| 14 | (NSS) | PLATE, BRUSH | | |
| 1211 279 H1 | SCREW, BRUSH PLATE | | |
| 15 | 1211 290 H1 | PLUNGER, SOLENOID | | |
| 16 | 1211 291 H1 | BOOT, PLUNGER | | |
| 17 | 1210 073 H1 | SPRING, PLUNGER | | |
| 18 | 1211 289 H1 | LEVER, SHIFT | | |
| 19 | 1211 356 H1 | WASHER, SPACER | | |
| 20 | 1211 286 H1 | WASHER, BRAKE | | |
| 21 | 1211 402 H1 | WASHER, THRUST | | |
| 22 | 1277 066 H1 | CABLE, TERMINAL | | |
| 23 | 1211 267 H1 | NUT, TERMINAL STUD | | |
| 24 | 19 839 R1 | NUT, ADJUSTING | | |
| 25 | (NSS) | SHOE, POLE | | |
| 1211 150 H1 | SCREW, POLE SHOE | | |
| 26 | 1211 265 H1 | WASHER, INSULATION | | |
| 27 | 1211 266 H1 | WASHER, PLAIN | | |
| 28 | 1211 280 H1 | WASHER, INSULATION | | |
| 29 | 1210 070 H1 | WASHER, PLUNGER | | |
| 1211 281 H1 | PACKAGE, TERMINAL INSULATOR | | |
| 30 | (NSS) | BUSHING, TERMINAL STUD | | |
| 31 | (NSS) | INSULATOR, STUD | | |
| 1211 264 H1 | PACKAGE, BUSHING | | |
| 32 | (NSS) | SUPPORT, INSULATOR | | |
| 33 | (NSS) | WASHER, INSULATION | | |
| 34 | 1211 151 H1 | GASKET, INSPECTION PLUG | | |
| 35 | 1211 287 H1 | GASKET, HOUSING | | |
| 36 | 1211 271 H1 | INSULATOR, POLE SHOE | | |
| 37 | 22 411 R1 | O-RING | | |
| 38 | 355 967 R1 | O-RING | | |
| 39 | 352 219 R1 | O-RING | | |
| 40 | 1210 066 H1 | PLUG, INSPECTION | | |
| 41 | 1211 277 H1 | PLUG, WICK | | |
| 42 | 1211 284 H1 | PLUG, HOLE | | |
| 43 | 1210 074 H1 | RETAINER, SPRING | | |
| 44 | 1210 072 H1 | RETAINER, SPRING | | |
| 45 | 1211 285 H1 | SEAL, OIL | | |
| 46 | 1211 152 H1 | SHAFT, SHIFT LEVER | | |
| 47 | 213 262 R1 | RING, RETAINING | | |
| 48 | 1211 276 H1 | WICK, FELT | | |
| 49 | (NSS) | FRAME, CE | | |
| (NSS) | BOLT, MOUNTING | | |
| 50 | (NSS) | NUT, TERMINAL STUD | | |
| 51 | (NSS) | WASHER, LOCK | | |
| 52 | (NSS) | INSULATOR, FIELD COIL | | |
| 53 | (NSS) | HOUSING, ARMATURE | | |
| 54 | (NSS) | HOUSING, LEVER | | |
| (NSS) | BOLT, MOUNTING | | |
| 55 | (NSS) | SCREW, FIELD COIL ATTACHING | | |
| 56 | 1302 333 H1 | CONNECTOR, TERMINAL TO SWITCH | | |
| | | | |
| | R1 - REMANUFACTURED ASSEMBLY AVAILABLE; REFER TO REMANUFACTURED | | |
| | ASSEMBLIES CATALOG. | | |
| | | | |
| | F1 - THIS SERIES CRANKING MOTOR IS NO LONGER AVAILABLE. ORDER THE | | |
| | FOLLOWING PART: | | |
| LA 0 848 | MOTOR, CRANKING (SEE PG 08-048) | | |
| | | | |
| | F2 - PACKAGE CONTAINS PARTS NOT REQUIRED FOR THIS CRANKING MOTOR. | | |
| | | | |
