| Item | Part No. | Part Name | Qty | Serial No. |
| 1 | | CYLINDER ASSEMBLY, DRAWBAR LIFT (SEE PG 10-220) | | |
| 142 648 | YOKE ASSEMBLY, LIFT | | |
| 2 | (NSS) | YOKE, LIFT CYLINDER | | |
| 3 | (NSS) | CAP, YOKE | | |
| 4 | 24 879 R1 | BOLT | | |
| 5 | 25 537 R1 | WASHER, FLAT | | |
| 6 | 142 921 | BUSHING, CYLINDER TRUNNION | | |
| 7 | 109 461 | FITTING, GREASE | | |
| 8 | 9413 983 | NUT, LOCK | | |
| 9 | 25 538 R1 | WASHER, FLAT | | |
| 10 | 12 699 | SHIM - 0.031 IN. (0.787 MM) | | |
| 11 | 12 699 A | SHIM - 0.015 IN. (0.381 MM) | | |
| 12 | 160 449 | CAP, BALL | | |
| 13 | 24 891 R1 | BOLT | | |
| 14 | | CYLINDER ASSEMBLY DRAWBAR SHIFT (SEE PG 10-216) | | |
| 15 | 25 522 R1 | NUT, HEX | | |
| 16 | 25 534 R1 | WASHER, FLAT | | |
| 17 | 129 083 R1 | CLAMP, TUBE | | |
| 18 | 48 204 | STUD | | |
| 1431 362 H91 | LINK ASSEMBLY, MOLDBOARD SUSPENSION | | |
| 19 | 1431 361 H91 | LINK WELDMENT | | |
| 20 | 31 035 | STUD, BALL | | |
| 21 | 127 145 | BUSHING | | |
| 22 | 24 863 R1 | BOLT | | |
| 23 | 120 384 | WASHER, LOCK | | |
| 24 | | CYLINDER ASSEMBLY, LOCK PIN (SEE PG 10-214) | | |
| 25 | 109 462 | FITTING, GREASE - 90 DEGREE | | |
| 26 | 129 105 | INSERT | | |
| 149 698 | ADHESIVE | | |
| 27 | 24 894 R1 | BOLT | | |
| 28 | 162 497 H45 | ARM ASSEMBLY, SUSPENSION | | |
| 29 | 127 568 | BUSHING | | |
| 30 | 137 917 | RETAINER, LIFT SHAFT | | |
| 31 | 24 862 R1 | BOLT | | |
| 32 | 24 866 R1 | BOLT | | |
| 33 | 162 494 | SHAFT, LINK | | |
| 34 | 161 855 | BEARING, ARM SHAFT | | |
| 158 551 | SHIM | | |
| 158 552 | SHIM | | |
| 35 | 161 563 | SHAFT | | |
| 36 | 24 896 R1 | BOLT | | |
| 37 | 128 830 | INDICATOR, SUSPENSION ARM | | |
| 38 | 148 641 | FITTING, GREASE | | |
| 39 | 25 529 R1 | NUT, HEX | | |
| 40 | 25 536 R1 | WASHER, FLAT | | |
| 41 | 31 509 | CAP, BALL | | |
| 42 | | ACTUATOR LINES, LOCK PIN CYLINDER (SEE PG 10-032) | | |
| | | | |
| | F1 - TO SERVICE WORN LIFT CYLINDER YOKE: REPLACE BUSHINGS WITH | | |
| | THE FOLLOWING; | | |
| 1438 325 H1 | BUSHING, UNDERSIZED | | |
