| Item | Part No. | Part Name | Qty | Serial No. |
| 1 | 736 705 C1 | HOSE, CONVERTER INLET | | |
| 2 | 9410 207 | CONNECTOR | | |
| 3 | 296 247 R1 | O-RING | | |
| 4 | 293 726 R1 | O-RING | | |
| 5 | 715 001 C1 | STRAINER, SCAVENGE | | |
| 6 | 300 525 R1 | FLANGE, SPLIT | | |
| 24 862 R1 | BOLT, MOUNTING - 1/2NCx1-1/2 | | |
| 7 | (712 496 C1) | HOSE, TRANS SCAVENGE | | |
| 8 | 716 348 C1 | BRACKET, HOSE | | |
| 9 | 311 511 R1 | CLIP, HOSE | | |
| 24 862 R1 | BOLT, MOUNTING - 1/2NCx1-1/2 | | |
| 25 536 R1 | WASHER, FLAT - 1/2 | | |
| 116 121 | WASHER, LOCK - 1/2 | | |
| 25 526 R1 | NUT, HEX - 1/2NC | | |
| 10 | 707 253 R1 | O-RING | | |
| 11 | 290 045 R1 | FLANGE, SPLIT | | |
| 24 850 R1 | BOLT, MOUNTING - 7/16NCx1-1/2 | | |
| 12 | 736 698 C1 | HOSE, SCAVENGE PUMP OUTLET | | |
| 13 | 657 689 C1 | CONNECTOR, LUBE | | |
| 14 | 307 915 R1 | O-RING | | |
| 15 | 350 818 R1 | O-RING | | |
| 16 | 736 705 C1 | HOSE, HOUSING DRAIN | | |
| 17 | 606 819 C1 | CONNECTOR | | |
| 18 | 716 405 C91 | TUBE ASSY, BREATHER | | |
| 265 204 R1 | SLEEVE, NUT | | |
| 265 205 R1 | NUT, TUBE | | |
| 19 | 306 132 C2 | STRAP, TIE | | |
| 20 | | TRANSMISSION (SEE PG 07-060) | | |
| 21 | | PUMP, CHARGE AND SCAVENGE (SEE PG 07-036) | | |
| 22 | | CONVERTER, TORQUE (SEE PG 07-030) | | |
| 23 | | HOUSING, FLYWHEEL (SEE PG 12-172) | | |
| 24 | | FRAME, REAR MAIN (SEE PG 09-012) | | |
| | | | |
| | F1 - DOUBLE CLAMPED AND BRACKETED AT BOTTOM OF TORQUE CONVERTER. ORDER | | |
| | THE FOLLOWING PART: | | |
| 1299 981 H91 | PACKAGE, SCAVENGE PIPING (SEE PG 07-028) | | |
| | | | |
| | F2 - USED WITH WEBSTER ELECTRIC PUMP ONLY. OLD STYLE PUMP (WEBSTER) AND | | |
| | LINES CAN BE REWORKED INTO NEW STYLE PUMP (COMMERCIAL INTERTEC) AND | | |
| | LINES BY ORDERING CONVERSION PACKAGE ON PG 07-026. | | |
| | | | |
| | F3 - OLD STYLE PUMP (WEBSTER) AND LINES CAN BE REWORKED INTO NEW STYLE | | |
| | PUMP (COMMERCIAL INTERTEC) AND LINES BY ORDERING CONVERSION PACKAGE | | |
| | ON PG 07-026. | | |
