| Item | Part No. | Part Name | Qty | Serial No. |
| 1 | 1301 822 H91 | ENGINE ASSEMBLY (SEE PG 11-002) | | |
| 2 | 1109 937 C1 | PLATE, FRONT ENGINE MOUNT | | |
| 24 875 R1 | BOLT, 5/8NC x2 | | |
| 25 556 R1 | WASHER, 5/8 FLAT | | |
| 3 | 1212 036 H1 | MOUNT, RUBBER | | |
| 4 | 1135 986 C1 | SPACER | | |
| 5 | 1130 549 C1 | WASHER | | |
| 6 | 25 360 R1 | BOLT, 3/4NC x5 1/2 | | |
| 7 | 9413 983 | NUT, 3/4NC - LOCK | | |
| 8 | 25 557 R1 | WASHER, 3/4 FLAT | | |
| 9 | 1109 922 C1 | SUPPORT, REAR ENGINE MOUNT | | |
| 24 880 R1 | BOLT, 5/8NC x3 1/2 | | |
| 25 547 R1 | WASHER, 5/8 FLAT | | |
| 10 | 1212 036 H1 | MOUNT, RUBBER | | |
| 11 | 1130 548 C1 | WASHER | | |
| 12 | 25 996 R1 | BOLT, 1 IN NC x6 | | |
| 13 | 26 665 R1 | WASHER, 1 IN FLAT | | |
| 14 | 9413 986 | NUT, 1 IN NC - LOCK | | |
| 15 | 876 108 C1 | O-RING | | |
| 16 | 1222 501 H1 | ADAPTER | | |
| 17 | 333 710 R91 | CLAMP, HOSE | | |
| 18 | | HOSE, OIL DRAIN (CUT 24 IN LONG) | | |
| 19 | 1137 020 C2 | FLANGE, ENGINE OIL DRAIN | | |
| 140 483 H | BOLT, 3/8NC x1 1/4 | | |
| 25 544 R1 | WASHER, 3/8 FLAT | | |
| 20 | 1136 873 C2 | PLUG, DRAIN | | |
| 21 | 1301 639 H91 | TUBE WELD, OIL FILLER | | |
| 140 483 H | SCREW (3/8 NC x1 1/4 | | |
| 25 544 R1 | WASHER 3/8 FLAT | | |
| 25 522 R1 | NUT, HEAVY HEX | | |
| 22 | 1301 638 H1 | HOSE, OIL | | |
| 23 | 327 257 R91 | CLAMP, HOSE | | |
| 24 | 1301 650 H1 | CAP, OIL FILLER TUBE | | |
| 25 | 1306 104 H1 | SPACER | | |
| 24 870 R1 | BOLT, HEX 1/2 NC x5 | | |
| 25 546 R1 | WASHER, 1/2 FLAT | | |
| 26 | 172 600 | PLUG | | |
| 713 532 R1 | GASKET | | |
| 445 090 | PLUG | | |
| N/I | 935 722 C1 | HOSE, BULK (3/4 IN ID) | | |
| | | | |
| | F1 - CUT TO LENGTH FROM BULK HOSE 935 722 C1. | | |
| | | | |
| | | | |
| | F2 - USED ON MACHINES NOT EQUIPPED WITH TACHOMETER - LOCATED IN | | |
| | RH LOWER QUADRANT OF FLYWHEEL HOUSING | | |
