Поиск по каталогу

ENGINE OIL RESERVE SYSTEM

Item	Part No.	Part Name	Qty	Serial No.
1	WB0267	FITTING, ELBOW - 90 DEG
2	XA1894	TANK, OIL RESERVE (45 GALLON) (1)
3	WB0266	FITTING, ELBOW - 90 DEG
4	VN9068	CAPSCREW - 1" - 8NC X 2"
5	WA0364	FLAT WASHER - 1" (HARDENED)
6	VM2357	NUT - 1" - 8NC
7	BF3361	BOX, AUTOMATIC TANK FILL CONTROL (1)
8	EK0195	PLATE, MOUNTING
9	MM0036	CAPSCREW - M10 X 1.5 X 20
10	MM0713	FLAT WASHER - M10 (HARDENED) (ZINC)
11	C5746	CAPSCREW - 1/4" - 20NC X 3/4"
12	C1546	FLAT WASHER - 1/4"
13	C5780	NUT - 1/4" - 20NC
14	SF9896	KNIFE, DISCONNECT - 14-16 AWG
15	DL4172	SLEEVE, INSULATING
16	WB0653	FITTING, ELBOW - 45 DEG
17	WB0369	FITTING, 45 DEG ELBOW
18	HA7813	HOSE, SUPPLY (TOP HOLE)
19	PC1918	ADAPTER, SUMP
20	HA7814	HOSE, RETURN (BOTTOM HOLE)
21	PC1262	ADAPTER, STRAIGHT
21	WA4896	FITTING
22	WB1301	CLAMP, CUSHIONED - 1/4"
23	MM0178	NUT, HEX - M10 X 1.5
24	MM0471	LOCKWASHER - M10
25	WB0456	FITTING, STRAIGHT
26	R2404	TEE, PIPE
27	DC5608	NIPPLE
28	SG3290	SWITCH, PRESSURE
29	EL4104	CABLE (ENGINE TO BATTERY DISCONNECT SWITCH BOX)
30	MM0469	LOCKWASHER - M6
31	MM0460	FLAT WASHER - M8
32	MM0176	NUT, HEX - M6 X 1
33	WB3097	CLAMP, CUSHIONED - 1/2"
34	TF6925	CLAMP, VINYL - 3/4" ID
35	TC1565	CLAMP, VINYL - 15/16" ID
36	TR9441	CLAMP, VINYL - 1 1/4" ID
37	MM0648	STUD, WELD - M10 X 1.50 X 25
38	MM0461	FLAT WASHER - M10
39	VH5017	TIE, CABLE
40	EJ7758	ROD, THREADED
NS\|42		NOTE: NS = NOT SHOWN
NS\|43	VH2583	TERMINAL, RING
NS\|44	VH2586	TERMINAL, RING
NS\|45	PC1135	NOTE: (1) INCLUDED IN PC1135 RESERVE SYSTEM KIT.
NS\|46		SEE FOLLOWING PAGE.