| Item | Part No. | Part Name | Qty | Serial No. |
| 1213 093 H91 | PACKAGE, IDENTIFICATION | | |
| 1 | (NSS) | PATENT MARKINGS | | |
| 2 | | STRIPE - 13 FT. LONG | | |
| 3 | (NSS) | DRESSER TRADEMARK | | |
| 4 | (NSS) | DRESSER DESIGNATION | | |
| 5 | (NSS) | DRESSER DESIGNATION | | |
| 6 | (NSS) | MODEL DESIGNATION | | |
| 1200 437 H92 | PACKAGE, PERSONAL SAFETY | | |
| 7 | 667 460 C2 | ENGINE COMPARTMENT CAUTION | | |
| 8 | 737 994 C1 | GENERAL CAUTION | | |
| 9 | 655 434 C2 | TRACK ADJUSTER CAUTION | | |
| 10 | 2754 473 R3 | HYD. RESERVOIR CAUTION | | |
| 11 | 1120 363 C2 | OPERATOR SAFETY CAUTION | | |
| 12 | 628 135 C4 | ENGINE START CAUTION | | |
| 13 | 737 993 C1 | ROLL OVER CAUTION | | |
| 14 | 1200 418 H1 | DIRECT DRIVE CAUTION | | |
| 1200 438 H92 | PACKAGE, INSTRUCTIONAL | | |
| 15 | (NSS) | ALTERNATOR INSTRUCTION | | |
| 16 | (NSS) | AIR CLEANER INSTRUCTION | | |
| 17 | (NSS) | ELECTRICAL SYSTEM MASTER DISCONNECT SWITCH | | |
| 18 | (NSS) | ENGINE OIL PRESSURE | | |
| 19 | (NSS) | FUEL | | |
| 20 | (NSS) | OIL LEVEL | | |
| 21 | (NSS) | THROTTLE CONTROL | | |
| 22 | (NS) | PLATE, PRODUCT IDENTIFICATION NUMBER | | |
| 28 266 R1 | SCREW, DRIVE | | |
| 23 | 743 487 C1 | MADE IN USA - FOR EXPORT ONLY | | |
| 24 | 743 486 C1 | COMPANY NAME - FOR CANADIAN SALES ONLY | | |
| 25 | 1213 230 H1 | STEERING CONTROL | | |
| 25 | 1208 021 H1 | STEERING CONTROL | | |
| 26 | 1214 371 H1 | SERVICE CHART | | |
| 27 | 727 954 C1 | DRIVE TRAIN PRESSURE TEST PORT IDENTIFICATION | | |
| 28 | 741 047 C1 | TRANSMISSION SHIFTING DIAGRAM | | |
| 28 | 741 048 C1 | TRANSMISSION SHIFTING DIAGRAM | | |
| 29 | 1200 422 H1 | DRAWBAR HITCHING PROCEDURE | | |
| 30 | (NS) | PLATE, ROPS SERIAL NUMBER | | |
| 145 373 | SCREW, DRIVE | | |
| 31 | 1208 068 H1 | BLADE CONTROL INSTRUCTIONS | | |
| 31 | 1208 022 H1 | BLADE CONTROL INSTRUCTIONS | | |
| 32 | 1208 024 H1 | RIPPER CONTROL INSTRUCTIONS | | |
| 32 | 1208 023 H1 | RIPPER CONTROL INSTRUCTIONS | | |
| 33 | 742 265 C2 | INSTRUMENT PANEL | | |
| 33 | 742 266 C2 | INSTRUMENT PANEL | | |
| 34 | 633 403 C1 | STARTING CHARGING RECEPTACLE IDENTIFICATION | | |
| 743 444 C1 | BULK STRIPE | | |
| | | | |
| | F1 - ALSO INCLUDES PRODUCT GRAPHICS NOT | | |
| | REQUIRED FOR THIS MACHINE | | |
| | | | |
| | F2 - CUT FROM BULK STRIPE 743 444 C1 | | |
| | | | |
| | | | |
| | F3 - FOR MACHINES WITH ENGINE SIDE ENCLOSURES | | |
| | | | |
| | | | |
| | F4 - FOR DIRECT DRIVE MODELS ONLY | | |
| | | | |
| | | | |
| | F5 - FOR MACHINES W/ SINGLE SPEED STEERING | | |
| | | | |
| | | | |
| | F6 - FOR MACHINES W/ TWO SPEED STEERING | | |
| | | | |
| | | | |
| | F7 - FOR TORQUE CONVERTER MODELS ONLY | | |
| | | | |
| | | | |
| | F8 - FOR MACHINES WITH BLADE LIFT ONLY | | |
| | | | |
| | | | |
| | F9 - FOR MACHINES WITH BLADE LIFT AND TILT | | |
| | | | |
| | | | |
| | F10 - FOR MACHINES WITH RIPPER LIFT ONLY | | |
| | | | |
| | | | |
| | F11 - FOR MACHINES WITH RIPPER LIFT AND PITCH | | |
| | | | |
| | | | |
| | F12 - FOR MACHINES WITH ROPS CANOPY | | |
| | | | |
| | | | |
| | F13 - FOR MACHINES WITH ROPS CAB | | |
| | | | |
