| Item | Part No. | Part Name | Qty | Serial No. |
| | FINAL DRIVE - NO-SPIN DIFFERENTIAL (SEE FIG. F5550-01A1) | | |
| | OR | | |
| | FINAL DRIVE - LOCK/UNLCOK DIFFERENTIAL(SEE FIG. F5550-01A1) | | |
| 1 | 19 940 R1 | NUT, LOCK | | |
| 2 | 1432 377 H1 | WASHER | | |
| 3 | | WHEEL (SEE FIG. T5280-02A0) | | |
| 4 | 1431 923 H1 | GASKET | | |
| 5 | 130 216 | KEY | | |
| 6 | 24 862 R1 | BOLT | | |
| 7 | 25 536 R1 | WASHER, FLAT | | |
| 8 | 12 353 | RETAINER, BEARING | | |
| 9 | 47 164 | SHIM - 0.030 - CORAL | | |
| 47 164 AH45 | SHIM - 0.015 - PINK | | |
| 47 164 B | SHIM - 0.005 - BLUE | | |
| 1285 283 H1 | SHIM - 0.003 - GREEN | | |
| 1285 284 H1 | SHIM - 0.002 - RED | | |
| 10 | 1278 105 H1 | SEAL, OIL | | |
| 11 | 24 862 R1 | BOLT | | |
| 12 | 25 536 R1 | WASHER, FLAT | | |
| 13 | 1283 506 H92 | HOUSING, BEARING | | |
| 14 | 159 907 | KIT, LIQUID GASKET | | |
| (NSS) | #518 GASKET - 25 ML SYRINGE | | |
| (NSS) | PRIMER "N" - 40 GRAM CAN | | |
| 15 | 619 697 C1 | CUP, BEARING | | |
| 16 | 619 696 C91 | BEARING | | |
| 17 | 1432 440 H91 | SHAFT WELDMENT - REAR - 22 TEETH | | |
| 18 | 1432 441 H91 | SHAFT WELDMENT - FRONT - 22 TEETH | | |
| 19 | 1438 387 H91 | CHAIN - SINGLE STRAND | | |
| 20 | 154 021 | LINK, CONNECTING | | |
| 21 | 1285 653 H1 | COVER, ACCESS | | |
| 22 | 25 534 R1 | WASHER, FLAT | | |
| 23 | 140 483 H | BOLT | | |
| 24 | 24 860 R1 | BOLT | | |
| 25 | 25 536 R1 | WASHER, FLAT | | |
| 26 | 68 363 | COVER, ACCESS | | |
| 27 | 33 603 | BREATHER VALVE ASSEMBLY | | |
| 28 | 23 921 R1 | BUSHING, REDUCER | | |
| 29 | 1277 938 H1 | ADAPTER, PIPE | | |
| 30 | 280 668 R91 | PLUG, MAGNETIC | | |
| | OR | | |
| 89 946 | PLUG, MAGNETIC | | |
| 31 | 1436 099 H91 | CASE, TANDEM L.H. | | |
| 1283 599 H92 | CASE, TANDEM R. H. | | |
| 32 | 1430 117 H1 | STEP, UPPER | | |
| 33 | 1430 116 H1 | STEP, LOWER | | |
| 34 | 444 687 | PLUG, PIPE - 1/8 IN. NPT | | |
| 35 | 77 506 | BREATHER | | |
| 36 | 83 005 H45 | PLUG, PIPE - 1 IN. NPT | | |
| N/I | 634 016 C1 | PIPE SEALANT - 50ML | | |
| | | | |
| | F1 QUANTITIES ARE FOR 2 TANDEM CASES. | | |
| | | | |
| | F2 NOT USED ON CURRENT PRODUCTION MACHINES, S/N/B UNKNOWN. USE ITEM 35 INSTEAD. | | |
| | | | |
| | F3 NO LONGER USED ON CURRENT PRODUCTION MACHINES, S/N/B UNKNOWN. | | |
| | | | |
| | F4 USED INSTEAD OF ITEMS 27, 28, 29 ON CURRENT PRODUCTION MACHINES ONLY, S/N/B UNKNOWN. | | |
| | | | |
| | F5 USED ON CURRENT PRODUCTION MACHINES ONLY, S/N/B UNKNOWN. | | |
| | | | |
