| Item | Part No. | Part Name | Qty | Serial No. |
| 1433 814 H91 | CONSOLE ASSEMBLY, STEERING | | |
| 1 | 120 621 | SCREW, OVAL HEAD | | |
| 2 | | PANEL, STEERING CONSOLE INSTRUMENT (SEE FIG. E5260-01A1) | | |
| 3 | 159 947 | SCREW, PAN HEAD | | |
| 4 | 1433 813 H91 | HEAD WELDMENT, CONSOLE | | |
| 5 | 299 412 C1 | CLAMP, CABLE | | |
| 6 | 180 024 | BOLT | | |
| 120 380 | WASHER, LOCK | | |
| 7 | 180 077 | BOLT | | |
| 25 708 R1 | WASHER, LOCK | | |
| 120 376 | NUT, HEX | | |
| 8 | 1436 533 H1 | FLASHER, TURN SIGNAL | | |
| 27 694 R1 | CLAMP, TUBE | | |
| 180 077 | BOLT | | |
| 120 214 | WASHER, LOCK | | |
| 120 376 | NUT, HEX | | |
| 9 | 1220 651 H2 | METER, HOUR | | |
| 10 | 25 555 R1 | WASHER, FLAT | | |
| 11 | 1253 048 H1 | KNOB, UTILITY | | |
| 12 | 23 979 R1 | SCREW, FLAT HEAD | | |
| 13 | 1253 211 H91 | CONTROL, LOCK | | |
| 14 | 1253 043 H1 | BOLT, SHOULDER | | |
| 15 | 1253 026 H2 | WASHER, NYLON BEARING | | |
| 16 | 120 437 H45 | BEARING | | |
| 17 | | CONTROL ASSEMBLY, STEERING (FIG. K5410-01A2) | | |
| 18 | 1253 197 H92 | LEVER, TURN SIGNAL | | |
| 1435 439 H1 | CLAMP | | |
| 19 | 1244 479 H1 | WHEEL, STEERING | | |
| 20 | 368 576 R1 | NUT, STEERING WHEEL | | |
| 21 | 1249 404 H91 | BUTTON, HORN | | |
| 22 | 1281 488 H1 | COVER, CONSOLE | | |
| 23 | 180 020 | BOLT | | |
| 24 | 158 663 | STRAP, TIE | | |
| 25 | 1281 482 H91 | CHANNEL WELDMENT, REAR | | |
| 26 | 1253 047 H91 | LOCK, CONSOLE | | |
| 27 | 104 977 R91 | RING, RETAINING | | |
| 28 | 1281 487 H91 | CHANNEL WELDMENT, FRONT | | |
| 29 | 1281 471 H92 | BRACKET, LOCK MOUNTING | | |
| 30 | 20 617 R1 | BOLT | | |
| 25 708 R1 | WASHER, FLAT | | |
| 31 | 1432 716 H1 | RELAY- 24 VOLT | | |
| 32 | 180 020 | BOLT | | |
| 120 380 | WASHER, LOCK | | |
| 33 | 27 291 R1 | CLAMP, CABLE | | |
| 34 | 192 450 | SCREW, SET | | |
| 35 | 24 840 R1 | BOLT | | |
| 28 422 R1 | WASHER, FLAT | | |
| 36 | 1281 807 H1 | SHAFT, LOWER | | |
| 1281 807 H2 | SHAFT, LOWER | | |
| 180 120 | BOLT | | |
| 25 553 R1 | WASHER, FLAT | | |
| 1253 026 H2 | WASHER, NYLON BEARING | | |
| 37 | 1253 214 H1 | GROMMET, BASE | | |
| 38 | 1431 905 H92 | BASE WELDMENT | | |
| 39 | 102 458 | SCREW, SET | | |
| 25 932 R1 | NUT, JAM | | |
| 40 | 180 020 | BOLT | | |
| 41 | 390 303 C1 | WASHER, FLAT | | |
| 42 | 1260 527 H1 | PIN, LOCK MOUNT | | |
| 43 | 1432 672 H1 | PAD, HOSE | | |
| N/I | 104 696 | ADHESIVE - 1 QT. CAN | | |
| | | | |
| | F1 S/N 202487 THRU 202531 | | |
| | | | |
| | F2 S/N 202532 & UP | | |
| | | | |
| | F3 USE WASHERS AS REQUIRED BETWEEN BASE AND CONSOLE CHANNELS TO ELIMINATE SIDE-TO-SIDE MOVEMENT. ALSO USE WASHERS BETWEEN BASE AND END WASHERS TO ELIMINATE GAPS. | | |
| | | | |
| | F4 NOT USED ON S/N 203112 AND UP | | |
| | | | |
