| Item | Part No. | Part Name | Qty | Serial No. |
| 404-70-00150 | LIFT ARM ASSEMBLY, TWO-SPOOL CONTROL VALVE | | |
| 424-877-1351 | LIFT ARM ASSEMBLY, THREE-SPOOL CONTROL VALVE | | |
| 424-850-0010 | LIFT ARM ASSEMBLY, HIGH-LIFT | | |
| 1 | (NSS) | ARM, LIFT | | |
| 2 | 424-70-11890 | BUSHING | | |
| 3 | 421-09-11310 | SEAL, DUST | | |
| 4 | 424-70-11810 | BUSHING | | |
| 5 | 424-09-12320 | SEAL, DUST | | |
| 6 | 424-70-11770 | BUSHING | | |
| 7 | 421-09-11310 | SEAL, DUST | | |
| 424-850-1210 | SPACER | | |
| 01573-22310 | SEAT | | |
| 8 | 423-70-11780 | SHIM - 0.059 IN. (1.5 MM) | | |
| 423-70-11880 | SHIM - 0.118 IN. (3.0 MM) | | |
| 9 | 424-70-11711 | PIN | | |
| 10 | 423-70-11160 | NIPPLE | | |
| 11 | 07020-00675 | FITTING, GREASE | | |
| 12 | 01010-81630 | BOLT | | |
| 13 | 421-70-11280 | WASHER | | |
| 14 | 421-09-11310 | SEAL, DUST | | |
| 15 | 423-70-11780 | SHIM - 0.059 IN. (1.5 MM) | | |
| 423-70-11880 | SHIM - 0.118 IN. (3.0 MM) | | |
| 16 | 424-70-11981 | PIN | | |
| 17 | 421-70-11430 | SHIM - 0.059 IN. (1.5 MM) | | |
| 18 | 424-70-11972 | PIN | | |
| 19 | 07020-00000 | FITTING, GREASE | | |
| 20 | 01010-81630 | BOLT | | |
| 21 | 421-70-11280 | WASHER | | |
| 22 | 423-70-11710 | SHIM - 0.059 IN. (1.5 MM) | | |
| 423-70-11810 | SHIM - 0.118 IN. (3.0 MM) | | |
| 23 | 423-70-11210 | O-RING - NON-SPLIT TYPE | | |
| 23 | 421-70-11410 | O-RING - SPLIT TYPE | | |
| 24 | 236-46-13620 | BOLT | | |
| 25 | 01641-20608 | WASHER | | |
| 26 | 01596-00606 | NUT | | |
| 27 | 424-70-11910 | PIN | | |
| 28 | 07020-00000 | FITTING, GREASE | | |
| 29 | 01010-81630 | BOLT | | |
| 30 | 421-70-11280 | WASHER | | |
| | | | |
| | F1 - FOR MACHINES WITH HIGH-LIFT ARM ONLY. | | |
| | | | |
| | | | |
| | F2 - THE FOLLOWING PARTS ARE ALSO REQUIRED ON MACHINES WITH HIGH-LIFT | | |
| | ARM: | | |
| 424-837-1610 | FLANGE | | |
| 424-837-1620 | PLATE | | |
| 07000-13038 | O-RING | | |
| 07372-21060 | BOLT | | |
