| Item | Part No. | Part Name | Qty | Serial No. |
| 1307 203 H1 | ALTERNATOR - PRODUCTION ONLY | | |
| 1310 137 H91 | ALTERNATOR - SERVICE ONLY | | |
| 1 | 1307 324 H1 | FRAME, SLIP RING END | | |
| 2 | 1236 651 H1 | BEARING, SLIP RING END | | |
| 3 | 1307 325 H1 | ROTOR ASSEMBLY | | |
| 4 | 1310 140 H1 | STATOR ASSEMBLY | | |
| 5 | 1307 327 H1 | FRAME, DRIVE END | | |
| 6 | 1213 268 H1 | BEARING, DRIVE END | | |
| 7 | 1310 141 H1 | RECTIFIER BRIDGE ASSEMBLY | | |
| 8 | 1307 329 H1 | DIODE TRIO | | |
| 9 | 1218 115 H1 | REGULATOR | | |
| 10 | 1307 330 H1 | TERMINAL PACKAGE - OUTPUT | | |
| 11 | 1307 331 H1 | TERMINAL PACKAGE - RELAY | | |
| 12 | 1307 332 H1 | CONNECTOR REGULATOR STUD | | |
| 13 | 1307 333 H1 | CONNECTOR RELAY TERMINAL | | |
| 14 | 1307 334 H1 | CAPACITOR | | |
| 15 | 1307 335 H1 | BRUSH HOLDER ASSEMBLY | | |
| 16 | 1307 336 H1 | BRUSH AND ARM | | |
| 17 | 1307 337 H1 | RETAINER PLATE - DE | | |
| 18 | 1218 242 H1 | BUSHING HINGE - SRE | | |
| 19 | 1218 130 H1 | COVER - REGULATOR TERMINAL | | |
| N/I | 1213 274 H1 | CAP - RELAY TERMINAL | | |
| 20 | 1307 338 H1 | FAN | | |
| 21 | 1310 142 H1 | PULLEY | | |
| 22 | 1218 126 H1 | NUT -REGULATOR | | |
| 23 | 120 622 | NUT - RECTIFIER BRIDGE | | |
| 24 | 1213 273 H1 | NUT - SHAFT | | |
| 25 | 1268 365 H1 | SCREW AND LOCK WASHER - RECTIFIER BRIDGE | | |
| 26 | 1236 654 H1 | SCREW, BRUSH HOLDER - PIVOT | | |
| 27 | 1268 365 H1 | SCREW, REGULATOR - GROUND | | |
| 28 | 1216 375 H1 | SCREW, REGULATOR - INSULATOR | | |
| 29 | 1307 339 H1 | SCREW, CAPACITOR | | |
| 30 | 1268 363 H1 | SCREW, BEARING RETAINER PLATE | | |
| 31 | 1307 340 H1 | SCREW AND LOCK WASHER, GROUND - SLIP RING END | | |
| | FRAME | | |
| 32 | 1268 370 H1 | WASHER - SHAFT NUT | | |
| 33 | 1307 341 H1 | BOLT - THRU | | |
| | | | |
| | F1 - THIS PART IS A NON-SERVICE PART AND IS LISTED FOR REFERENCE | | |
| | ONLY. | | |
| | | | |
| | F2 - WHEN REPLACING ALTERNATOR, ORDER 22 SI SERVICE ALTERNATOR. | | |
| | SEE FIG. A6109-A2A3 FOR SERVICE ALTERNATOR P/N 1316 279 H91. | | |
| | | | |
| | F3 - FOR THIS APPLICATION, REPLACE THIS PULLEY WITH PULLEY | | |
| | P/N 1295 024 H2. | | |
