| Item | Part No. | Part Name | Qty | Serial No. |
| 1315 092 H91 | BLADE EQUIPMENT | | P076093-- |
| 1262 759 H91 | TRUNNIONS | | P076093-- |
| 1 | 1283 791 H91 | TRUNNION, LEFT | | P076093-- |
| 25 646 R1 | BOLT, HEX - 1NCx2-3/4 | | P076093-- |
| 25 550 R1 | WASHER, FLAT - 1 | | P076093-- |
| 2 | 1283 792 H91 | TRUNNION, RIGHT | | P076093-- |
| 25 646 R1 | BOLT, HEX - 1NCx2-3/4 | | P076093-- |
| 25 550 R1 | WASHER, FLAT - 1 | | P076093-- |
| 3 | 1279 063 H1 | PIN, C FRAME | | P076093-- |
| 24 880 R1 | BOLT, HEX - 5/8NCx3-1/2 | | P076093-- |
| 9412 231 | NUT, LOCK - 5/8NC | | P076093-- |
| 4 | 1209 358 H1 | SHIM, FRAME - 0.090IN | | P076093-- |
| 1263 050 H91 | DOZER CYLINDERS | | P076093-- |
| 5 | | CYLINDER, LIFT(SEE FIG. T2170-01A1) | | P076093-- |
| 6 | | CYLINDER, ANGLE (SEE FIG. T2190-01A0) | | P076093-- |
| 7 | | CYLINDER, TILT (SEE FIG. T2180-01A0) | | P076093-- |
| 8 | 1270 112 H1 | PIN, MOUNTING | | P076093-- |
| 24 856 R1 | BOLT, HEX - 7/16NCx4 | | P076093-- |
| 9413 981 | NUT, LOCK - 7/16NC | | P076093-- |
| 9 | 1279 088 H1 | PIN, MOUNTING | | P076093-- |
| 24 856 R1 | BOLT, HEX - 7/16NCx4 | | P076093-- |
| 9413 981 | NUT, LOCK - 7/16NC | | P076093-- |
| 10 | | BLADE AND ANGLING FRAME (SEE FIG. T2110-02A1) | | P076093-- |
| 11 | 1270 296 H91 | PIN, LOCK | | P076093-- |
| 24 859 R1 | BOLT, HEX - 1/2NCx3/4 | | P076093-- |
| 932 278 C1 | WASHER, FLAT - 1-3/8 | | P076093-- |
| 12 | 1209 358 H1 | SHIM, FRAME - 0.090IN | | P076093-- |
| 13 | 1209 358 H1 | SHIM, FRAME - 0.090IN | | P076093-- |
| 14 | 1209 358 H1 | SHIM, FRAME - 0.090IN | | P076093-- |
| 15 | | FRAME, C (SEE FIG. T2110-03A0) | | P076093-- |
| 16 | | BAR, C FRAME RUB (SEE FIG. R0500-01A2) | | P076093-- |
| | | | |
| | | | |
| | F1 PART NUMBER IS A NONSERVICE PART AND IS LISTED FOR REFERENCE ONLY. ORDER INDIVIDUAL PIECE PARTS. | | |
| | | | |
| | F2 - MINIMUM OF 1 SHIM TO A MAXIMUM OF 2 SHIMS USED AT THIS POSITION. | | |
| | | | |
