| Item | Part No. | Part Name | Qty | Serial No. |
| 1267 242 H95 | BLADE AND ANGLING FRAME | | P086301 -- |
| 1 | 620 693 C2 | PIN, BLADE TO ANGLING FRAME | | P086301 -- |
| 2 | 1267 333 H1 | SHIM, LOWER RETAINER PLATE | | P086301 -- |
| 3 | 1267 334 H1 | PLATE LOWER RETAINER | | P086301 -- |
| 24 890 R1 | BOLT, HEX - 3/4NCx2-1/2 | | P086301 -- |
| 4 | 1267 332 H1 | PLATE, UPPER RETAINER | | P086301 -- |
| 24 890 R1 | BOLT, HEX - 3/4NCx2-1/2 | | P086301 -- |
| 5 | 1267 331 H1 | SHIM, UPPER RETAINER PLATE | | P086301 -- |
| 6 | | FRAME, ANGLING (SEE FIG. T2110-02A2) | | P086301 -- |
| 1267 241 H94 | BLADE ASSEMBLY, DOZER | | P086301 -- |
| 1267 243 H94 | BLADE SUB ASSEMBLY | | P086301 -- |
| 7 | (NSS) | BLADE, DOZER | | P086301 -- |
| 8 | 1282 813 H2 | PLATE, WEAR | | P086301 -- |
| 9 | 1282 814 H2 | PLATE, WEAR | | P086301 -- |
| 10 | 705 734 C1 | BUSHING, PIN | | P086301 -- |
| 11 | 620 563 C1 | EDGE, INNER CUTTING | | P086301 -- |
| 646 534 C1 | BOLT, PLOW | | P086301 -- |
| 25 529 R1 | NUT, HEX - 3/4NC | | P086301 -- |
| 12 | 1267 329 H1 | EDGE, OUTER CUTTING | | P086301 -- |
| 646 534 C1 | BOLT, PLOW | | P086301 -- |
| 25 529 R1 | NUT, HEX - 3/4NC | | P086301 -- |
| 13 | 1268 300 H1 | BEARING, NON-LUBRICATED | | P086301 -- |
| 14 | 1268 301 H1 | SEAL, PIN | | P086301 -- |
| | | | |
| | F1 PART NUMBER IS A NONSERVICE PART AND IS LISTED FOR REFERENCE ONLY. ORDER INDIVIDUAL PIECE PARTS. | | |
| | | | |
| | | | |
| | F2 - MINIMUM OF 1 SHIM TO A MAXIMUM OF 6 SHIMS USED PER SIDE. | | |
| | | | |
| | | | |
| | F3 - MINIMUM OF 1 SHIM TO A MAXIMUM OF 7 SHIMS USED PER SIDE. | | |
| | | | |
