| Item | Part No. | Part Name | Qty | Serial No. |
| (1270 710 H91) | FINAL DRIVE | | |
| 1 | 741 191 C2 | SPROCKET, CASTED TEETH | | |
| 1 | 1298 898 H1 | SPROCKET, MACHINED TEETH | | |
| 24 887 R1 | BOLT, HEX - 3/4NCx1-3/4 | | |
| 25 538 R1 | WASHER, FLAT - 3/4 | | |
| 1311 336 H91 | DRIVE ASSY, LEFT FINAL | | |
| 2 | 1309 074 H1 | SHAFT, SPROCKET CARRIER | | |
| 3 | 1208 980 H91 | KIT, SEAL | | |
| 4 | 1209 206 H91 | BEARING, TAPERED ROLLER - OUTER | | |
| 67 190 R91 | CONE, BEARING | | |
| 17 844 H | CUP, BEARING | | |
| 5 | 1209 262 H91 | BEARING, TAPERED ROLLER - INNER | | |
| 1209 263 H91 | CONE, BEARING | | |
| 170 234 R1 | CUP, BEARING | | |
| 6 | 1208 981 H1 | SPACER, BEARING | | |
| 7 | 1209 669 H1 | SHIM, CARRIER - 0.005IN | | |
| 7 | 1209 670 H1 | SHIM, CARRIER - 0.007IN | | |
| 7 | 1209 671 H1 | SHIM, CARRIER - 0.020IN | | |
| 8 | 1209 672 H1 | WASHER, CARRIER | | |
| 9 | 25 358 R1 | BOLT, HEX - 3/4NCx3-3/4 | | |
| 10 | 1208 982 H1 | GASKET, COVER | | |
| 11 | 1208 983 H1 | COVER, CARRIER SHAFT | | |
| 70 427 R1 | BOLT, HEX - 7/16NCx1-1/4 | | |
| 115 314 | WASHER, LOCK - 7/16 | | |
| 1311 334 H91 | HOUSING ASSY, LEFT | | |
| 12 | (NSS) | HOUSING ASSY, LEFT | | |
| 13 | 280 668 R91 | PLUG, FILLER AND CHECK | | |
| 367 478 R1 | PIN, DOWEL - 1/2x1-1/16 | | |
| 104 939 | PLUG, #3 CORK | | |
| 14 | 621 109 C2 | GEAR, DRIVE | | |
| 15 | 621 110 C3 | SCREW, RETAINER | | |
| 454 522 R1 | NUT, RETAINER - 1/2NC | | |
| 16 | 621 111 C1 | PINION, DRIVE | | |
| 17 | 62 528 R91 | BEARING, TAPERED ROLLER - OUTER | | |
| 62 923 R1 | CONE, BEARING | | |
| 130 503 H | CUP, BEARING | | |
| 17 | 662 056 R91 | BEARING, TAPERED ROLLER - OUTER | | |
| 662 057 R91 | CONE, BEARING | | |
| 300 985 R1 | CUP, BEARING | | |
| 17 | 621 144 C91 | BEARING, TAPERED ROLLER - OUTER | | |
| 622 210 C91 | CONE, BEARING | | |
| 622 211 C1 | CUP, BEARING | | |
| 18 | 659 457 R91 | BEARING, TAPERED ROLLER - INNER | | |
| 659 458 R91 | CONE, BEARING | | |
| 659 459 R1 | CUP, BEARING | | |
| 18 | 659 460 R91 | BEARING, TAPERED ROLLER - INNER | | |
| 659 461 R91 | CONE, BEARING | | |
| 659 462 R1 | CUP, BEARING | | |
| 18 | 659 713 R91 | BEARING, TAPERED ROLLER - INNER | | |
| 659 714 R91 | CONE, BEARING | | |
| 659 715 R1 | CUP, BEARING | | |
| 19 | 621 140 C1 | RING, RETAINING - 0.109IN | | |
| 621 112 C1 | RING, RETAINING - 0.101IN | | |
| 705 474 C1 | RING, RETAINING - 0.117IN | | |
| 20 | 621 113 C93 | SEAL, OIL | | |
| 21 | 280 668 R91 | PLUG,DRAIN | | |
| 22 | 716 898 C1 | COVER, LEFT BOTTOM | | |
| 24 863 R1 | BOLT, HEX - 1/2NCx1-3/4 | | |
| 116 121 | WASHER, LOCK - 1/2 | | |
| 23 | 1206 069 H1 | O-RING, HOUSING | | |
| 26 322 R1 | BOLT, HEX - 5/8NCx2 | | |
| 24 878 R1 | BOLT, HEX - 5/8NCx2-3/4 | | |
| 25 695 R1 | BOLT, HEX - 5/8NCx6-1/2 | | |
| 734 324 C1 | STUD, MOUNTING | | |
| 25 537 R1 | WASHER, FLAT - 5/8 | | |
| 25 528 R1 | NUT, HEX - 5/8NC | | |
| 1311 337 H91 | DRIVE ASSY, RIGHT FINAL | | |
| 2 | 1309 074 H1 | SHAFT, SPROCKET CARRIER | | |
| 3 | 1208 980 H91 | KIT, SEAL | | |
| 4 | 1209 206 H91 | BEARING, TAPERED ROLLER - OUTER | | |
| 67 190 R91 | CONE, BEARING | | |
| 17 844 H | CUP, BEARING | | |
| 5 | 1209 262 H91 | BEARING, TAPERED ROLLER - INNER | | |
| 1209 263 H91 | CONE, BEARING | | |
| 170 234 R1 | CUP, BEARING | | |
| 6 | 1208 981 H1 | SPACER, BEARING | | |
| 7 | 1209 669 H1 | SHIM, CARRIER - 0.005IN | | |
| 7 | 1209 670 H1 | SHIM, CARRIER - 0.007IN | | |
| 7 | 1209 671 H1 | SHIM, CARRIER - 0.020IN | | |
| 8 | 1209 672 H1 | WASHER, CARRIER | | |
| 9 | 25 358 R1 | BOLT, HEX - 3/4NCx3-3/4 | | |
| 10 | 1208 982 H1 | GASKET, COVER | | |
| 11 | 1208 983 H1 | COVER, CARRIER SHAFT | | |
| 70 427 R1 | BOLT, HEX - 7/16NCx1-1/4 | | |
| 115 314 | WASHER, LOCK - 7/16 | | |
| 1311 335 H91 | HOUSING ASSY, RIGHT | | |
| 12 | (NSS) | HOUSING ASSY, RIGHT | | |
| 13 | 280 668 R91 | PLUG, FILLER AND CHECK | | |
| 367 478 R1 | PIN, DOWEL - 1/2x1-1/16 | | |
| 104 939 | PLUG, #3 CORK | | |
| 14 | 621 109 C2 | GEAR, DRIVE | | |
| 15 | 621 110 C3 | SCREW, RETAINER | | |
| 454 522 R1 | NUT, RETAINER - 1/2NC | | |
| 16 | 621 111 C1 | PINION, DRIVE | | |
| 17 | 62 528 R91 | BEARING, TAPERED ROLLER - OUTER | | |
| 62 923 R1 | CONE, BEARING | | |
| 130 503 H | CUP, BEARING | | |
| 17 | 662 056 R91 | BEARING, TAPERED ROLLER - OUTER | | |
| 662 057 R91 | CONE, BEARING | | |
| 300 985 R1 | CUP, BEARING | | |
| 17 | 621 144 C91 | BEARING, TAPERED ROLLER - OUTER | | |
| 622 210 C91 | CONE, BEARING | | |
| 622 211 C1 | CUP, BEARING | | |
| 18 | 659 457 R91 | BEARING, TAPERED ROLLER - INNER | | |
| 659 458 R91 | CONE, BEARING | | |
| 659 459 R1 | CUP, BEARING | | |
| 18 | 659 460 R91 | BEARING, TAPERED ROLLER - INNER | | |
| 659 461 R91 | CONE, BEARING | | |
| 659 462 R1 | CUP, BEARING | | |
| 18 | 659 713 R91 | BEARING, TAPERED ROLLER - INNER | | |
| 659 714 R91 | CONE, BEARING | | |
| 659 715 R1 | CUP, BEARING | | |
| 19 | 621 140 C1 | RING, RETAINING - 0.109IN | | |
| 621 112 C1 | RING, RETAINING - 0.101IN | | |
| 705 474 C1 | RING, RETAINING - 0.117IN | | |
| 20 | 621 113 C93 | SEAL, OIL | | |
| 21 | 280 668 R91 | PLUG, DRAIN | | |
| 22 | 716 899 C1 | COVER, RIGHT BOTTOM | | |
| 24 863 R1 | BOLT, HEX - 1/2NCx1-3/4 | | |
| 116 121 | WASHER, LOCK - 1/2 | | |
| 23 | 1206 069 H1 | RING, SEAL - HOUSING | | |
| 26 322 R1 | BOLT, HEX - 5/8NCx2 | | |
| 24 878 R1 | BOLT, HEX - 5/8NCx2-3/4 | | |
| 25 695 R1 | BOLT, HEX - 5/8NCx6-1/2 | | |
| 734 324 C1 | STUD, MOUNTING | | |
| 25 537 R1 | WASHER, FLAT - 5/8 | | |
| 25 528 R1 | NUT, HEX - 5/8NC | | |
| | | | |
| | F1 - PART NUMBER IS A NON-SERVICE PART AND IS LISTED FOR REFERENCE ONLY. | | |
| | | | |
| | | | |
| | F2 - THE FINAL DRIVES CAN BE IDENTIFIED BY MEASURING THE BOLT HOLE | | |
| | PATTERN(A) OF THE CARRIER SHAFT COVER: | | |
| | EARLY VERSION FINAL DRIVE CARRIER SHAFT COVER.....112mm(4.4IN) | | |
| | LATER VERSION FINAL DRIVE CARRIER SHAFT COVER.....125mm(4.9IN) | | |
