| Item | Part No. | Part Name | Qty | Serial No. |
| (1211 861 H91) | HEATER PRESSURIZER | | |
| 1 | | HEATER PRESSURIZER (SEE PG 13-092) | | |
| 9413 979 | NUT, HEX - 3/8NC | | |
| 25 553 R1 | WASHER, FLAT - 3/8 | | |
| 25 542 R1 | WASHER, FLAT - 1/4 | | |
| 120 375 | NUT, HEX - 1/4NC | | |
| 2 | 736 489 C1 | CHANNEL, RIGHT | | |
| 24 839 R1 | BOLT, MOUNTING - 3/8NCx3/4 | | |
| 25 544 R1 | WASHER, FLAT - 3/8 | | |
| 3 | 935 522 C1 | STRAP, TIE | | |
| 4 | 326 078 R1 | CLAMP (ABOVE VISOR) | | |
| 24 840 R1 | BOLT, MOUNTING - 3/8NCx1 | | |
| 25 544 R1 | WASHER, FLAT - 3/8 | | |
| 9413 979 | NUT, LOCK - 3/8NC | | |
| 5 | 330 929 R1 | CLAMP (AT RH FRONT FRAME) | | |
| 6 | 668 585 C1 | ELBOW, WATER HOSE | | |
| 7 | | HOSE, UPPER HEATER (64 IN. LONG) | | |
| 8 | | HOSE, LOWER HEATER RETURN (116 IN. LONG) | | |
| 9 | | HOSE, LOWER HEATER SUPPLY (151 IN. LONG) | | |
| 10 | 122 316 R91 | CLAMP, HOSE | | |
| 11 | 326 078 R1 | CLIP, HOSE | | |
| 24 839 R1 | BOLT, MOUNTING - 3/8NCx3/4 | | |
| 25 544 R1 | WASHER, FLAT - 3/8 | | |
| 12 | 326 078 R1 | CLIP, HOSE | | |
| 24 840 R1 | BOLT, MOUNTING - 3/8NCx1 | | |
| 25 544 R1 | WASHER, FLAT - 3/8 | | |
| 9413 979 | NUT, LOCK - 3/8NC | | |
| 13 | 1235 817 H1 | NIPPLE, REDUCER | | |
| 14 | 153 843 R1 | NIPPLE, HOSE | | |
| 15 | 444 043 | ELBOW - 90° | | |
| 16 | 627 686 C1 | VALVE, SHUT OFF | | |
| 17 | 23 174 R1 | BUSHING, REDUCER | | |
| 18 | | TRIM, FLEXIBLE - 8 IN LONG | | |
| 19 | | SEAL - 10 IN LONG | | |
| 20 | 306 132 C2 | STRAP, CABLE | | |
| 22 | 1220 778 H1 | GASKET, LOWER | | |
| 23 | 1220 779 H1 | GASKET, UPPER | | |
| 1232 002 H1 | GREASE, RELEASE AGENT | | |
| 1232 251 H1 | COMPOUND, RUBBER SEALING | | |
| 117 724 C1 | HOSE, BULK | | |
| 1262 660 H1 | MOLDING, BULK | | |
| | | | |
| | F1 - PART NUMBER IS A NON-SERVICE PART AND IS LISTED FOR REFERENCE ONLY. | | |
| | | | |
| | | | |
| | F2 - CUT REQUIRED LENGTH FROM BULK HOSE 117 724 C1. | | |
| | | | |
| | | | |
| | F3 - CUT REQUIRED LENGTH FROM BULK MOLDING 1262 660 H1. | | |
| | | | |
