| Item | Part No. | Part Name | Qty | Serial No. |
| 1 | | RESERVOIR, HYDRAULIC (SEE PG 10-020) | | |
| 24 875 R1 | BOLT, HEX - 5/8NCx2 | | |
| 25 537 R1 | WASHER, FLAT - 5/8 | | |
| 2 | | PUMP, EQUIPMENT (SEE PG 10-034) | | |
| 25 506 R1 | BOLT, HEX - 1/2NCx1-5/8 | | |
| 25 536 R1 | WASHER, FLAT - 1/2 | | |
| 468 339 R1 | RING, PUMP SEAL | | |
| (1270 968 H91) | MAIN PUMP PIPING | | |
| 3 | 9410 982 | ELBOW - 90° | | |
| 307 915 R1 | RING, SEAL | | |
| 4 | 1270 980 H1 | TUBE, SUCTION | | |
| 5 | | HOSE, SUCTION - 4 IN. LONG | | |
| 6 | 681 896 C1 | CLAMP, HOSE | | |
| 7 | 1270 981 H1 | TUBE, SUCTION | | |
| 8 | 150 776 C91 | ELBOW - 90° | | |
| 296 247 R1 | RING, SEALING | | |
| 9 | 129 967 H1 | HOSE, PUMP OUTLET | | |
| 10 | 1277 075 H1 | TUBE, VALVE INLET | | |
| 322 499 R1 | CLIP, TUBE | | |
| 24 840 R1 | BOLT, HEX - 3/8NCx1 | | |
| 25 534 R1 | WASHER, FLAT - 3/8 | | |
| 11 | 9409 934 | ELBOW - 90° | | |
| 12 | 161 849 | QUICK DISCONNECT | | |
| 13 | 162 144 | CAP, DUST | | |
| 14 | 9410 205 | CONNECTOR | | |
| 368 269 R1 | RING, SEAL | | |
| 15 | 157 159 | INSERT | | |
| 368 269 R1 | RING, SEAL | | |
| 16 | | HOSE, RETURN - 8.5 IN. LONG | | |
| 17 | 681 896 C1 | CLAMP, HOSE | | |
| 18 | 391 806 R1 | ELBOW, FILTER INLET - 90° | | |
| 296 247 R1 | RING, SEAL | | |
| 19 | | VALVE, 3 SPOOL CONTROL (SEE PG 10-046) | | |
| 19 | | VALVE, 4 SPOOL CONTROL (SEE PG 10-048) | | |
| 20 | | FILTER, EQUIPMENT (SEE PG 10-032) | | |
| 306 132 C2 | STRAP, TIE | | |
| 706 844 C1 | HOSE, BULK - 1.25 IN. ID | | |
| 706 843 C1 | HOSE, BULK - 1 IN. ID | | |
| | | | |
| | F1 - PART NUMBER IS A NON-SERVICE PART AND IS LISTED FOR REFERENCE ONLY. | | |
| | | | |
| | | | |
| | F2 - CUT REQUIRED LENGTH FROM BULK HOSE 706 844 C1. | | |
| | | | |
| | | | |
| | F3 - CUT REQUIRED LENGTH FROM BULK HOSE 706 843 C1. | | |
| | | | |
