| Item | Part No. | Part Name | Qty | Serial No. |
| 1234 343 H91 | TILT, HYDRAULIC | | |
| 1 | | CYLINDER, TILT (SEE PG 10-112) | | |
| 2 | | BAFFLE, LOWER RADIATOR (SEE PG 06-002) | | |
| 3 | 222 648 H1 | UNION, AT EQUIPMENT CONTROL VALVE | | |
| 4 | 296 247 R1 | O-RING | | |
| 5 | 717 978 C1 | HOSE, FROM VALVE | | |
| 6 | 935 522 C1 | STRAP, TIE | | |
| 7 | 326 078 R1 | CLAMP, HOSE | | |
| 24 839 R1 | BOLT, MOUNTING - 3/8NCx3/4 | | |
| 25 534 R1 | WASHER, FLAT - 3/8 | | |
| 8 | 653 171 C1 | CLAMP, TUBE | | |
| 21 318 R1 | BOLT, MOUNTING - 3/8NCx2-1/2 | | |
| 25 544 R1 | WASHER, FLAT - 3/8 | | |
| 25 522 R1 | NUT, HEX - 3/8NC | | |
| 9 | 603 046 R1 | SPACER, TUBE CLAMP | | |
| 10 | | HOSE, CHAFING - CUT 7 IN. LONG | | |
| 11 | 306 132 C2 | STRAP, CABLE | | |
| 12 | 738 506 C1 | HOSE, TO CYLINDER, ROD END | | |
| 13 | 711 785 C1 | HOSE, TO CYLINDER, HEAD END | | |
| 14 | 9410 978 | ELBOW - 90° | | |
| 15 | 364 885 R1 | O-RING | | |
| 16 | 1208 915 H1 | CLAMP, HALF | | |
| 24 862 R1 | BOLT, MOUNTING - 1/2NCx1-1/2 | | |
| 25 536 R1 | WASHER, FLAT - 1/2 | | |
| 17 | 330 929 R1 | CLAMP, HOSE | | |
| 24 839 R1 | BOLT, MOUNTING - 3/8NCx3/4 | | |
| 25 544 R1 | WASHER, FLAT - 3/8 | | |
| 18 | 1235 088 H91 | GUARD, HOSE - ON BLADE | | |
| 24 862 R1 | BOLT, MOUNTING - 1/2NCx1-1/2 | | |
| 25 536 R1 | WASHER, FLAT - 1/2 | | |
| 19 | 738 534 C1 | GUARD, HOSE - ON CYLINDER | | |
| 25 687 R1 | BOLT, MOUNTING - 1/2NCx6 | | |
| 25 555 R1 | WASHER, FLAT - 1/2 | | |
| 9412 230 | NUT, LOCK - 1/2NC | | |
| 20 | 737 236 C1 | LEVER, TILT | | |
| 140 483 H | BOLT, MOUNTING - 3/8NCx1-1/4 | | |
| | | | |
| | CONTINUED ON NEXT PAGE | | |
| 25 534 R1 | WASHER, FLAT - 3/8 | | |
| 21 | 124 551 | KEY, WOODRUFF | | |
| 22 | | LINK, TILT CONTROL (SEE PG 10-130) | | |
| 23 | 16 616 R1 | PIN, CLEVIS | | |
| 103 373 | PIN, COTTER - 3/32x3/4 | | |
| 30 450 R1 | PIN, COTTER - 2.5x16 | | |
| 24 | 326 078 R1 | CLAMP, HOSE | | |
| 24 859 R1 | BOLT, MOUNTING - 1/2NCx3/4 | | |
| 25 536 R1 | WASHER, FLAT - 1/2 | | |
| 25 526 R1 | NUT - 1/2NC | | |
| 25 | | VALVE, EQUIPT. CONTROL - 2 SPOOL (SEE PG 10-072) | | |
| | VALVE, EQUIPT. CONTROL - 3 SPOOL (SEE PG 10-076) | | |
| 407 005 R1 | HOSE, BULK - 1-5/8 IN ID | | |
| | | | |
| | F1 - PART NUMBER IS A NON SERVICE PART AND IS LISTED FOR REFERENCE ONLY. | | |
| | | | |
| | | | |
| | F2 - MACHINE WITH TWO CLAMPS. | | |
| | | | |
| | | | |
| | F3 - MACHINE WITH ONE CLAMP. | | |
| | | | |
| | | | |
| | F4 - CUT REQUIRED LENGTH FROM BULK HOSE 407 005 R1. | | |
| | | | |
