| Item | Part No. | Part Name | Qty | Serial No. |
| (1279 028 H91) | ENCLOSURE, PERFORATED HOOD AND SIDES - FACTORY | | |
| (1279 029 H91) | ENCLOSURE, PERFORATED HOOD AND SIDES - FIELD | | |
| 1 | 1210 181 H2 | ANGLE, HOOD MOUNTING | | |
| 24 861 R1 | BOLT - 1/2NCx1-1/4 | | |
| 25 536 R1 | WASHER, FLAT - 1/2 | | |
| (1278 613 H91) | HOOD ASSY, PERFORATED | | |
| 2 | 1278 614 H91 | WELDMENT, PERFORATED HOOD | | |
| 3 | 742 467 C1 | DOOR ASSY, HOOD ACCESS | | |
| 24 840 R1 | BOLT - 3/8NCx1 | | |
| 25 534 R1 | WASHER, FLAT - 3/8 | | |
| 25 522 R1 | NUT, HEX, HEAVY - 3/8NC | | |
| 4 | 1278 616 H91 | DOOR ASSY, PERFORATED | | |
| 24 840 R1 | BOLT - 3/8NCx1 | | |
| 25 534 R1 | WASHER, FLAT - 3/8 | | |
| 25 522 R1 | NUT, HEX, HEAVY - 3/8NC | | |
| 5 | 1207 143 H1 | HANDLE, LATCH | | |
| 6 | 20 895 R1 | PIN, COIL SPRING - 1/4x1 | | |
| 7 | 120 390 | WASHER, FLAT - 1/2 | | |
| 8 | 1234 733 H1 | PAWL | | |
| 9 | 1207 694 H1 | SPRING | | |
| 10 | 25 536 R1 | WASHER, FLAT - 1/2 | | |
| 11 | 19 494 R1 | PIN, COIL SPRING - 5/32x7/8 | | |
| 12 | 1234 731 H1 | PIN, LATCH | | |
| 13 | 454 254 | PLUG, BUTTON | | |
| 14 | 1210 182 H1 | ISO MOUNT | | |
| 24 865 R1 | BOLT - 1/2NCx2-1/4 | | |
| 357 020 R1 | WASHER, FLAT - 17/32 ID x 1-3/4 OD | | |
| 25 546 R1 | WASHER, FLAT - 1/2 | | |
| 9412 230 | NUT, LOCK - 1/2NC | | |
| 15 | 619 769 R1 | SPACER | | |
| 24 882 R1 | BOLT - 5/8NCx4-1/2 | | |
| 16 | 1234 643 H91 | WELDMENT, LEFT ENGINE SIDE PLATE | | |
| 26 317 R1 | BOLT - 1/2NCx1-1/4 | | |
| 334 950 R2 | WASHER, PILOT | | |
| 25 555 R1 | WASHER, FLAT - 1/2 | | |
| 17 | 1234 644 H91 | WELDMENT, RIGHT ENGINE SIDE PLATE | | |
| 26 317 R1 | BOLT - 1/2NCx1-1/4 | | |
| 334 950 R2 | WASHER, PILOT | | |
| 25 555 R1 | WASHER, FLAT - 1/2 | | |
| 18 | | DOOR, LEFT ENGINE SIDE (SEE PG 13-032) | | |
| 26 317 R1 | BOLT - 1/2NCx1-1/4 | | |
| 25 555 R1 | WASHER, FLAT - 1/2 | | |
| 19 | | DOOR, RIGHT ENGINE SIDE (SEE PG 13-032) | | |
| 26 317 R1 | BOLT - 1/2NCx1-1/4 | | |
| 25 555 R1 | WASHER, FLAT - 1/2 | | |
| 20 | | MOLDING - 16 IN. LONG | | |
| 21 | 1252 183 H1 | SEAL, AIR STACK | | |
| 22 | 657 121 C1 | FLANGE, HOOD COVER | | |
| 23 | 657 122 C1 | RETAINER, SPRING | | |
| 24 | 737 594 C2 | BOLT ASSY, HOOD HOLDDOWN | | |
| 25 | 1234 122 H91 | WELDMENT, LEFT ENGINE SIDE SHEET | | |
| 26 317 R1 | BOLT - 1/2NCx1-1/4 | | |
| 25 555 R1 | WASHER, FLAT - 1/2 | | |
| 26 | 1234 124 H91 | WELDMENT, RIGHT ENGINE SIDE SHEET | | |
| 26 317 R1 | BOLT - 1/2NCx1-1/4 | | |
| 25 555 R1 | WASHER, FLAT - 1/2 | | |
| 27 | 1234 226 H91 | SUPPORT, LEFT HOOD | | |
| 26 317 R1 | BOLT - 1/2NCx1-1/4 | | |
| 25 555 R1 | WASHER, FLAT - 1/2 | | |
| 28 | 1234 227 H91 | SUPPORT, RIGHT HOOD | | |
| 26 317 R1 | BOLT - 1/2NCx1-1/4 | | |
| 25 555 R1 | WASHER, FLAT - 1/2 | | |
| 29 | 1234 616 H91 | WELDMENT, RIGHT COVER | | |
| 30 | 1234 615 H91 | WELDMENT, LEFT COVER | | |
| 31 | 716 432 C1 | ANGLE, UPPER | | |
| 32 | 716 434 C1 | ANGLE, LEFT LOWER | | |
| 33 | 716 435 C1 | ANGLE, RIGHT LOWER | | |
| 25 547 R1 | WASHER, FLAT - 5/8 | | |
| 27 406 R1 | BOLT - 1/2NCx1-3/4 | | |
| 25 555 R1 | WASHER, FLAT - 1/2 | | |
| 34 | 1234 618 H1 | COVER | | |
| 25 536 R1 | WASHER, FLAT - 1/2 | | |
| 9412 230 | NUT, LOCK - 1/2NC | | |
| 1262 660 H1 | EDGE TRIM/MOLDING, BULK | | |
| | | | |
| | F1 - PART NUMBER IS A NON-SERVICE PART AND IS LISTED FOR REFERENCE ONLY. | | |
| | | | |
| | | | |
| | F2 - CUT REQUIRED LENGTH FROM BULK TRIM 1262 660 H1. | | |
| | | | |
| | | | |
| | F3 - NOT INCLUDED IN FIELD APPLICATION ATTACHMENT. | | |
| | | | |
