| Item | Part No. | Part Name | Qty | Serial No. |
| 1 | 58B-22-00501 | HOUSING, AXLE | | |
| 2 | TX8110 | SLEEVE (2) | | |
| 3 | 58F-50-00130 | SPACER (2) | | |
| 4 | EH7811 | PIN, PANHARD ROD (2) | | |
| 5 | EH7812 | ANTI-SWAY BAR W/BEARINGS | | |
| 5 | EH7813 | BAR, ANTI-SWAY | | |
| 6 | PB0027 | BUSHING, BALL (2) | | |
| 7 | VN9351 | RING, RETAINING (2) | | |
| 8 | 58B-22-00520 | RETAINER, BEARING (1) | | |
| 9 | WB3026 | CAPSCREW - 7/8" - 9NC X 6 3/4" (12 PT) (1) | | |
| 10 | VN9953 | LOCKNUT - 7/8" - 9NC (1) | | |
| 11 | VN9087 | CAPSCREW - 5/8" - 11NC X 2 1/2" (1) | | |
| 12 | C1541 | LOCKWASHER - 5/8" (1) | | |
| 13 | EK1746 | RETAINER, PIN (1) | | |
| 14 | 58B-22-00510 | SPACER (1) | | |
| 15 | XB0690 | PIN, DRIVE PIVOT (1) | | |
| 16 | EM8109 | SHOULDER BOLT - 5/8" - 11NC X 7.16" (FRAME END) (2) | | |
| 16 | EM8121 | SHOULDER BOLT - 5/8" - 11NC X 7.01" (AXLE END) (2) | | |
| 17 | WA0361 | FLAT WASHER - 5/8" (HARDENED) (2) | | |
| 18 | VN9952 | LOCKNUT - 5/8" - 11NC (2) | | |
| 19 | WB1059 | CAPSCREW - 1 1/4" - 7NC X 4 1/2" (12 PT) (1) | | |
| 20 | 58B-22-00530 | PIVOT EYE ASSEMBLY | | |
| 20 | 58B-22-00560 | EYE, PIVOT | | |
| 21 | 58B-22-00550 | BEARING, SPHERICAL (1) | | |
| 22 | 58B-22-00540 | CARRIER, BEARING (1) | | |
| 23 | EK5634 | FLAT WASHER - 1 3/8" (HARDENED) | | |
| 24 | 58B-50-00130 | CAPSCREW - 1 3/8" - 6NC X 4" (12 PT) | | |
| 25 | 58F-06-03480 | CABLE, GROUND 24VDC | | |
| 26 | MM0471 | LOCKWASHER - M10 | | |
| 27 | MM0178 | NUT - M10 X 1.50 | | |
| 28 | MM0604 | CAPSCREW - M10 X 1.50 X 20 | | |
| NS|32 | 58B-MP-AK160 | NOTE: (1) INCLUDED IN 58B-MP-AK160 NOSE CONE PIN KIT. | | |
| NS|33 | 58B-MP-AK150 | (2) INCLUDED IN 58B-MP-AK150 PAN HARD ROD PIN KIT. | | |
