| Item | Part No. | Part Name | Qty | Serial No. |
| 1301 747 H91 | DIFFERENTIAL ASSEMBLY, | |||
| 1 | 1301 739 H1 | HOUSING, REAR DIFFERENTIAL | ||
| 2 | 444 571 | PLUG | ||
| 3 | 9410 361 | PLUG | ||
| 4 | 368 269 R1 | O-RING | ||
| 5 | 30 333 R1 | PIN, DOWEL | ||
| 6 | 1301 740 H1 | CAGE | ||
| 7 | 1301 715 H1 | SPACER | ||
| 7A | 1301 718 H1 | SHIM, 0.05 mm | ||
| 7B | 1301 719 H1 | SHIM, 0.25 mm | ||
| 7C | 1301 720 H1 | SHIM, 0.12 mm | ||
| 8 | 1301 748 H91 | BEARING ASSEMBLY | ||
| (NSS) | CONE | |||
| (NSS) | CUP | |||
| N/I | 1301 704 H91 | PINION AND GEAR ASSEMBLY | ||
| 9 | (NSS) | PINION, GEAR | ||
| 10 | (NSS) | GEAR | ||
| 11 | 1300 224 H1 | CARRIER | ||
| 12 | 1300 226 H1 | GEAR | ||
| 13 | 1112 156 C1 | WASHER | ||
| 13A | 1300 225 H1 | WASHER | ||
| 14 | 1245 565 H1 | SHAFT | ||
| 15 | 1248 900 H1 | PIN | ||
| 16 | 1300 227 H1 | PINION | ||
| 17 | 30 068 R1 | BOLT (225 FT-LBS TORQUE) | ||
| 18 | N/A | BEARING ASSEMBLY | ||
| 630 694 C91 | CONE | |||
| 630 695 C1 | CUP | |||
| 19 | 1110 832 C91 | BEARING ASSEMBLY | ||
| (NSS) | CONE | |||
| (NSS) | CUP | |||
| 20 | 07012-00080 | SEAL | ||
| 21 | 1301 745 H1 | RETAINER | ||
| 21A | 30 003 R1 | BOLT, M8 X 25 | ||
| 21B | 934 309 R1 | WASHER, LOCK - M8 | ||
| 22 | 1301 708 H91 | COUPLING W/SLINGER | ||
| 23 | 1301 724 H1 | WASHER | ||
| 24 | 1301 746 H1 | O-RING | ||
| 25 | 30 077 R1 | BOLT (225 FT-LBS TORQUE) | ||
| 26 | 264 681 R1 | O-RING | ||
| 27 | 1300 258 H1 | SHIM, 0.05 mm | ||
| 1300 259 H1 | SHIM 0.1 mm | |||
| 1300 260 H1 | SHIM 0.4 mm | |||
| 28 | 30 043 R1 | BOLT (90 FT-LBS TORQUE) | ||
| 29 | 30 185 R1 | WASHER | ||
| 30 | 1301 730 H1 | CARRIER | ||
| 31 | 1112 206 C1 | RING, SEAL (SQ-CUT) | ||
| 32 | 1301 733 H1 | SHIM, 0.08mm | ||
| 1301 734 H1 | SHIM, 0.2mm | |||
| 1301 735 H1 | SHIM, 0.3mm | |||
| 1301 736 H1 | SHIM, 0.8mm | |||
| 33 | 30 042 R1 | BOLT (90 FT-LBS TORQUE) | ||
| 33A | 30 177 R1 | WASHER | ||
| 34 | 1301 737 H1 | COVER | ||
| 35 | 30 042 R1 | BOLT (90 FT-LBS TORQUE) | ||
| 35A | 30 349 R1 | PIN, M12 X 30 | ||
| 36 | 30 177 R1 | WASHER | ||
| 37 | SHAFT (SEE PG 07-094) | |||
| F1 - SHIMS ARE SPLIT, MUST ORDER IN SETS OF TWO. | ||||