| Item | Part No. | Part Name | Qty | Serial No. |
| (1281 348 H91) | RIPPER | | |
| (701 487 C91) | FRAME AND STABILIZER | | |
| 1 | | TOOLBEAM | | |
| 1 | 540 968 R2 | TOOLBEAM | | |
| 2 | | LINK, UPPER CONNECTING (SEE PG 17-018) | | |
| 3 | | LINK, LOWER CONNECTING (SEE PG 17-018) | | |
| 4 | 540 994 R91 | PIN, LINK | | |
| 271 547 | BOLT, MOUNTING - 5/8NCx1-1/2 | | |
| 23 276 R1 | WASHER, FLAT - 5/8 | | |
| 121 574 | WASHER, LOCK - 5/8 | | |
| 492 389 R1 | KEEPER, BOLT | | |
| 109 461 | FITTING, LUBE | | |
| 5 | 540 998 R1 | PIN, REAR UPPER LINK | | |
| 271 547 | BOLT, MOUNTING - 5/8NCx1-1/2 | | |
| 23 276 R1 | WASHER, FLAT - 5/8 | | |
| 121 574 | WASHER, LOCK - 5/8 | | |
| 492 389 R1 | KEEPER, BOLT | | |
| 109 461 | FITTING, LUBE | | |
| 6 | 541 001 R1 | PIN, REAR LOWER LINK | | |
| 109 461 | FITTING, LUBE | | |
| 7 | 541 003 R1 | RING, CORD | | |
| (701 489 C91) | CYLINDERS | | |
| 8 | | CYLINDER, RIPPER (SEE PG 10-064) | | |
| 109 461 | FITTING, LUBE | | |
| 9 | 541 004 R1 | PIN, CYLINDER | | |
| 24 863 R1 | BOLT, MOUNTING - 1/2NCx1-3/4 | | |
| 120 384 | WASHER, LOCK - 1/2 | | |
| 21 330 R1 | NUT, HEX - 1/2NC | | |
| 10 | 851 506 C1 | PIN, CYLINDER | | |
| 378 484 R1 | PIN, HEADED - 5/16x2 | | |
| 12 235 R1 | PIN, COTTER - 1/8x5/8 | | |
| | TUBING AND HOSES (SEE PG 10-012) | | |
| (701 791 C91) | TOOTH AND PINS | | |
| 11 | | TOOTH, RIPPER (SEE PG 17-020) | | |
| 12 | 392 158 R1 | PIN, INNER TOOTH | | |
| 180 033 | BOLT, MOUNTING - 1/4NCx1-3/8 | | |
| 23 911 R1 | NUT, LOCK - 1/4NC | | |
| 13 | 1303 822 H1 | PIN, INNER SHANK | | |
| 180 044 | BOLT, HEX - 1/4NCx2 | | |
| 23 911 R1 | NUT, LOCK - 1/4NC | | |
| 14 | 540 982 R1 | PIN, OUTER TOOTH | | |
| 20 248 R1 | BOLT, MOUNTING - 3/8NCx2-1/4 | | |
| 17 044 R1 | NUT, LOCK - 3/8NC | | |
| 15 | 1303 822 H1 | PIN, OUTER SHANK | | |
| 180 044 | BOLT, HEX - 1/4NCx2 | | |
| 23 911 R1 | NUT, LOCK - 1/4NC | | |
| (1281 355 H91) | FRAME AND MOUNTING | | |
| 16 | 1280 899 H91 | FRAME, MOUNTING | | |
| 24 890 R1 | BOLT, MOUNTING - 3/4NCx2-1/2 | | |
| 25 848 R1 | BOLT, MOUNTING - 1-1/8NCx3 | | |
| 17 | | TOOTH, ADDITIONAL (SEE PG 17-020) | | |
| | | | |
| | F1 - PART NUMBER IS A NON-SERVICE PART AND IS LISTED FOR REFERENCE ONLY. | | |
| | | | |
| | | | |
| | F2 - USES THREE DIFFERENT STYLE PINS TO MOUNT RIPPER SHANKS. ORDER THE | | |
| | THE FOLLOWING PARTS: | | |
| 541 027 R2 | TOOLBEAM | | |
| 1303 822 H1 | PIN, SHANK | | |
| 180 044 | BOLT, HEX - 1/4NCx2 | | |
| 23 911 R1 | NUT, LOCK - 1/4NC | | |
| | | | |
| | WHEN ADDITIONAL SHANKS ARE USED ORDER THE APPROPRIATE AMOUNT OF | | |
| | PINS AND HARDWARE. | | |
| | | | |
| | F3 - USES SAME STYLE PINS TO MOUNT SHANKS AT THREE OR FIVE POSITIONS. | | |
| | | | |
| | | | |
| | F4 - USED WITH EARLY STYLE TOOLBEAM. | | |
| | | | |
| | | | |
| | F5 - USED WITH LATER STYLE TOOLBEAM. | | |
| | | | |
