| Item | Part No. | Part Name | Qty | Serial No. |
| (1283 327 H91) | AXLE ASSEMBLY | | |
| 1 | 60 539 | NUT, AXLE - TIGHTEN TO 1950 FT/LBS WET | | |
| 2 | 45 420 | WASHER, LOCKING | | |
| 3 | 90 965 | WASHER | | |
| 4 | | WHEEL (SEE PG 15-002) | | |
| 5 | 130 216 | KEY | | |
| 6 | 24 862 R1 | BOLT - TIGHTEN TO 70 FT/LBS WET | | |
| 7 | 25 536 R1 | WASHER, FLAT | | |
| 8 | 12 353 | RETAINER, BEARING | | |
| 9 | 47 164 | SHIM - 0.030 - CORAL | | |
| 47 164AH45 | SHIM - 0.015 - PINK | | |
| 47 164 B | SHIM - 0.005 - BLUE | | |
| 1285 283 H1 | SHIM - 0.003 - GREEN | | |
| 1285 284 H1 | SHIM - 0.002 - RED | | |
| 10 | 1278 105 H1 | SEAL, OIL | | |
| 11 | 24 862 R1 | BOLT - TIGHTEN TO 70 FT/LBS WET | | |
| 12 | 25 536 R1 | WASHER, FLAT | | |
| 13 | 1283 506 H92 | HOUSING, BEARING | | |
| 14 | 159 907 | KIT, LIQUID GASKET | | |
| (NSS) | #518 GASKET - 25 ML SYRINGE | | |
| (NSS) | PRIMER INN IN - 40 GRAM CAN | | |
| 15 | 90 972 | CUP, BEARING | | |
| 16 | 90 971 | CONE, BEARING | | |
| 17 | 1285 214 H91 | SHAFT WELDMENT - REAR - 22 TEETH | | |
| 18 | 1285 215 H91 | SHAFT WELDMENT - FRONT - 22 TEETH | | |
| 19 | 152 106 | CHAIN - SINGLE STRAND | | |
| 154 021 | LINK, CONNECTING | | |
| 20 | 1431 923 H1 | GASKET | | |
| 21 | 1285 653 H1 | COVER, ACCESS | | |
| 22 | 25 534 R1 | WASHER, FLAT | | |
| 23 | 140 483 H | BOLT | | |
| 24 | 24 860 R1 | BOLT | | |
| 25 | 25 536 R1 | WASHER, FLAT | | |
| 26 | 68 363 | COVER, ACCESS | | |
| 27 | 33 603 | BREATHER VALVE ASSEMBLY | | |
| 28 | 23 921 R1 | BUSHING, REDUCER | | |
| 29 | 1277 938 H1 | ADAPTER, PIPE | | |
| 30 | 280 668 R91 | PLUG, MAGNETIC | | |
| 89 946 | PLUG, MAGNETIC | | |
| 31 | 1283 599 H91 | CASE, TANDEM - L.H | | |
| 1283 595 H91 | CASE, TANDEM - R.H | | |
| 32 | 1430 117 H1 | STEP - R.H. ONLY | | |
| 33 | 1430 116 H1 | STEP - R.H. ONLY | | |
| N/I | 634 016 C1 | PIPE SEALANT - 50ML | | |
| | | | |
| | F1 - QUANTITIES ARE FOR 2 TANDEM CASES | | |
| | | | |
