| Item | Part No. | Part Name | Qty | Serial No. |
| 1252 906 H91 | BATTERIES AND MOUNTING (510C) | | |
| 1252 907 H91 | BATTERIES AND MOUNTING (515C, 515CH) | | |
| 1 | 1305 963 H1 | BOLT, BATTERY HOLDDOWN | | |
| 1234 147 H2 | CHANNEL, BATTERY MNTG | | |
| 25 534 R1 | WASHER, 3/8 FLAT | | |
| 25 522 R1 | NUT, 3/8NC | | |
| 2 | 1101 636 C1 | BAR, RETAINING | | |
| 24 838 R1 | BOLT, 3/8NC X 1/2 | | |
| 25 534 R1 | WASHER, 3/8 FLAT | | |
| 3 | 1200 274 H1 | BATTERY, DRY / 700A | | |
| 476 074 C1 | NUT, BATTERY TERMINAL | | |
| N/I | 1305 965 H1 | TRAY, BATTERY ACID | | |
| N/I | 1306 041 H1 | TUBE, DRAINT (PLYWOOD) | | |
| N/I | 122 316 R91 | CLAMP, TUBE, DRAIN UPPER | | |
| N/I | 28 122 R1 | CLAMP, TUBE, DRAIN LOWER | | |
| 1252 912 H91 | WIRING AND CLIPS (510C) | | |
| 1252 913 H91 | WIRING AND CLIPS (515C, 515CH) | | |
| 5 | 1248 869 H3 | HARNESS, INTERMEDIATE | | |
| 6 | 935 522 C1 | STRAP, TIE | | |
| 7 | 892 033 C1 | CLAMP, 1 1/4 ID | | |
| 24 839 R1 | BOLT, 3/8NC X 3/4 | | |
| 25 534 R1 | WASHER, 3/8 FLAT | | |
| 25 522 R1 | NUT, 3/8NC | | |
| 8 | 299 400 C1 | CLAMP, 1/4 ID | | |
| 24 839 R1 | BOLT, 3/8NC X 3/4 | | |
| 24 840 R1 | BOLT, 3/8NC X 1 | | |
| 25 534 R1 | WASHER, 3/8 FLAT | | |
| 25 522 R1 | NUT, 3/8NC | | |
| 9 | 299 407 C1 | CLAMP, 1/2 ID | | |
| 24 839 R1 | BOLT, 3/8NC X 3/4 | | |
| 25 534 R1 | WASHER, 3/8 FLAT | | |
| 10 | 154 049 H1 | GROMMET | | |
| 11 | 27 291 R1 | CLAMP, 1 IN ID | | |
| 24 839 R1 | BOLT, 3/8NC X 3/4 | | |
| 25 534 R1 | WASHER, 3/8 FLAT | | |
| 12 | 1248 870 H3 | HARNESS, ENGINE | | |
| 13 | 141 453 H1 | CLAMP, 13/16 ID | | |
| 14 | 299 406 C1 | CLAMP, 7/16 ID | | |
| 15 | 892 033 C1 | CLAMP, 1 1/4 ID | | |
| 24 839 R1 | BOLT, 3/8NC X 3/4 | | |
| 25 534 R1 | WASHER, 3/8 FLAT | | |
| 25 522 R1 | NUT, 3/8NC | | |
| 16 | 299 565 C1 | CLAMP, 11/16 ID | | |
| 24 839 R1 | BOLT, 3/8NC X 3/4 | | |
| 25 534 R1 | WASHER, 3/8 FLAT | | |
| 17 | 299 615 C1 | CLAMP, 5/8 ID | | |
| 931 833 R1 | BOLT, M12 X 25 | | |
| 120 396 | WASHER, 1/2 FLAT | | |
| 18 | 360 713 C1 | CLAMP, 7/16 ID (UNDER CAB) | | |
| 19 | 740 184 C1 | CABLE, ENGINE TO GROUND | | |
| 20 | 931 195 R1 | BOLT, M10 X 25 (AT ENGINE) | | |
| 933 965 R1 | WASHER, M10 FLAT | | |
| 21 | 740 184 C1 | CABLE, GROUND TO MASTER SWITCH | | |
| 22 | 20 537 R1 | BOLT, 3/8NC X 1 1/4 (510C/515C) | | |
| 390 305 C1 | WASHER, 3/8 FLAT | | |
| 21 333 R1 | NUT, 3/8NC | | |
| 23 | 21 335 R1 | BOLT, 3/8NC X 3/4 | | |
| 390 305 C1 | WASHER, 3/8 FLAT | | |
| 24 | 1151 756 C1 | CABLE, BATTERY (+) TO BATTERY (-) | | |
| 25 | 1277 303 H1 | CABLE, BATTERY (+) TO STARTER | | |
| 26 | 1127 825 C1 | CABLE, BATTERY (-) TO MASTER SWITCH | | |
| 27 | 299 566 C1 | CLAMP, 3/4 ID | | |
| 24 839 R1 | BOLT, 3/8NC X 3/4 | | |
| 25 534 R1 | WASHER, 3/8 FLAT | | |
| 1252 915 H91 | LIGHTING AND MOUNTING (510C) | | |
| 1252 916 H91 | LIGHTING AND MOUNTING (515C, 515CH) | | |
| 28 | | LAMP, REAR (SEE PG 08-024) | | |
| 120 391 | WASHER, #10 FLAT | | |
| 121 801 | WASHER, #10 LOCK - INT. TOOTH | | |
| 120 361 | NUT, #10-24 MACHINE | | |
| 29 | | LAMP, STOP AND TAIL (SEE PG 08-026) | | |
| 120 391 | WASHER, #10 FLAT | | |
| 121 801 | WASHER, #10 LOCK - INT. TOOTH | | |
| 120 361 | NUT, #10-24 MACHINE | | |
| 30 | 1124 664 C1 | SUPPORT, REAR LIGHT MOUNTING (510C/515C) | | |
| 31 | 24 866 R1 | BOLT, 1/2NC X 2 1/2 (510C/515C) | | |
| 25 536 R1 | WASHER, 1/2 FLAT | | |
| 33 | | LAMP, FRONT (SEE PG 08-028) | | |
| 176 749 H1 | SPACER | | |
| 25 546 R1 | WASHER, 1/2 FLAT | | |
| 9411 648 | NUT, 1/2NF LOCK | | |
| 34 | 1128 246 C1 | SUPPORT, LH - FRONT LAMP MOUNTING (510C) | | |
| 1128 247 C1 | SUPPORT, RH - FRONT LAMP MOUNTING (510C) | | |
| 24 839 R1 | BOLT, 3/8NC X 3/4 | | |
| 25 534 R1 | WASHER, 3/8 FLAT | | |
| 34 | 1128 206 C2 | SUPPORT, FRONT LAMP MOUNTING (515C, 515CH) | | |
| 1128 207 C2 | SUPPORT, FRONT LAMP MOUNTING (515C, 515CH) | | |
| 24 839 R1 | BOLT, 3/8NC X 3/4 | | |
| 25 534 R1 | WASHER, 3/8 FLAT | | |
| 35 | 1303 379 H91 | HARNESS, REAR LIGHTS | | |
| 36 | VN 7600 | GROMMET, RUBBER | | |
| 1104 876 C1 | GROMMET, RUBBER | | |
| 1252 918 H91 | SWITCHES AND RELAYS (510C) | | |
| 1252 919 H91 | SWITCHES AND RELAYS (515C, 515CH) | | |
| 37 | 257 854 C91 | SWITCH, STOP LIGHT | | |
| 38 | 930 587 C4 | SWITCH, MASTER DISCONNECT | | |
| 1214 890 H2 | KEY, MASTER DISCONNECT SWITCH | | |
| 120 388 | WASHER, 3/8 FLAT | | |
| 39 | 1128 323 C1 | SWITCH, PARKING BRAKE | | |
| 454 869 | BOLT, 5/16NC X 3/4 | | |
| 120 214 | WASHER, 5/16 LOCK | | |
| 27 254 R1 | NUT, 5/16NC | | |
| 40 | 1107 069 C1 | SWITCH, FRONT HORN | | |
| 180 034 | BOLT, 1/4NC X 1 1/2 | | |
| 390 303 C1 | WASHER, 1/4 FLAT | | |
| 25 402 R1 | NUT, 1/4NC | | |
| 41 | 1244 829 H1 | SHEET, HORN SWITCH MOUNTING | | |
| 42 | 1245 830 H1 | SPACER, HORN SWITCH MOUNTING | | |
| 43 | 1132 514 C1 | SWITCH, TRANSMISSION DISCONNECT | | |
| 100 740 | SCREW, #6-32 X 3/4 - RDH SLT | | |
| 131 044 | WASHER, #6 LOCK | | |
| 134 530 | NUT, #6-32 | | |
| 44 | 1120 331 C1 | SWITCH, OIL PRESSURE | | |
| 443 998 | ADAPTER, 1/8-27 PIPE | | |
| 45 | 1216 162 H1 | SENDER, TORQUE CONVERTER TEMPERATURE | | |
| 46 | 1101 584 C3 | SWITCH, TORQUE CONVERTER TEMPERATURE | | |
| 47 | 1216 162 H1 | SENDER, ENGINE WATER TEMPERATURE | | |
| 48 | 1137 360 C2 | SWITCH, ENGINE WATER TEMPERATURE | | |
| 49 | 1207 387 H2 | SWITCH, MAGNETIC | | |
| 50 | 22 470 R1 | BOLT, 1/4NC X 3/4 | | |
| 390 303 C1 | WASHER, 1/4 FLAT | | |
| 25 402 R1 | NUT, 1/4NC | | |
| 51 | 27 254 R1 | NUT, 5/16NC | | |
| 120 214 | WASHER, 5/16 LOCK | | |
| 52 | 120 614 | NUT, #10-32 MACHINE | | |
| 120 217 | WASHER, #10 LOCK | | |
| 53 | 882 902 C1 | ANGLE, MAGNETIC MOUNTING | | |
| 931 833 R1 | BOLT, M12 X 25 | | |
| 933 966 R1 | WASHER, M12 LOCK | | |
| 1252 921 H91 | HORN & OPERATED DEVICES (510C) | | |
| 1252 922 H91 | HORN & OPERATED DEVICES (515C, 515CH) | | |
| 54 | 739 762 C1 | HORN | | |
| 197 420 H2 | NUT, 7/8NF STAMPED | | |
| 1260 812 H1 | BRACKET, HORN MOUNTING | | |
| 390 304 C1 | WASHER, 5/16 FLAT | | |
| 27 254 R1 | NUT, 5/16NC | | |
| 1252 924 H91 | PANEL AND GAUGES (510C) | | |
| 1252 925 H91 | PANEL AND GAUGES (515C, 515CH) | | |
| 55 | | PANEL W/GAUGES, INSTRUMENT (SEE PG 11-004) | | |
| 24 843 R1 | BOLT, 3/8NC X 2 | | |
| 25 544 R1 | WASHER, 3/8 FLAT | | |
| 56 | 1222 937 H91 | SUPPORT, PANEL MOUNTING | | |
| 24 839 R1 | BOLT, 3/8NC X 3/4 | | |
| 25 534 R1 | WASHER, 3/8 FLAT | | |
| 57 | 24 839 R1 | BOLT, SUPPORT MOUNTING | | |
| 25 534 R1 | WASHER, 3/8 FLAT | | |
| 25 522 R1 | NUT, 3/8NC | | |
| 58 | 1128 456 C1 | COVER, INSTRUMENT PANEL | | |
| 28 411 R1 | SCREW, #10-24 X 3/4 - SKT HD | | |
| 59 | 1128 457 C2 | PANEL, RH - KNEE (INSTRUMENT) | | |
| 25 222 R1 | BOLT, 1/4NC X 3/4 | | |
| 25 532 R1 | WASHER, 1/4 FLAT | | |
| 60 | 1128 458 C2 | PANEL, LH - KNEE (INSTRUMENT) | | |
| 25 222 R1 | BOLT, 1/4NC X 3/4 | | |
| 25 532 R1 | WASHER, 1/4 FLAT | | |
| 61 | 1108 065 C91 | ALARM, BACK-UP (SEE PG 08-030) | | |
| 1244 201 H91 | ALTERNATOR AND CRANKING MOTOR (510C) | | |
| 1237 641 H91 | ALTERNATOR AND CRANKING MOTOR (515C, 515CH) | | |
| 62 | | ALTERNATOR (SEE PG 08-020) | | |
| 63 | | CRANKING MOTOR (510C) (SEE PG 08-012) | | |
| 63 | | CRANKING MOTOR (515C, 515CH) (SEE PG 08-016) | | |
| N/I | HARNESS, VALVE FEED BOOM (FOR MODELS NOT | | |
| | EQUIPPED WITH BOOM POSITIONER) | | |
| 299 400 C1 | CLAMP, HARNESS | | |
| 24 840 R1 | BOLT, 3/8NC X 1 | | |
| 25 522 R1 | NUT, 3/8NC | | |
| | | | |
| | F1 - PART NUMBER IS A NON-SERVICE PART AND IS LISTED | | |
| | FOR REFERENCE ONLY. ORDER INDIVIDUAL PIECE P | | |
